HOSE AS 5306859 - Caterpillar

Removal Procedure
Start By:
Release system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change"for the correct procedure for the correct draining and filling procedures.
Illustration 1 g03078496
Disconnect harness assemblies (1).
Disconnect hose assemblies (4).
Use suitable lifting device to remove piston motor (3). The weight of piston motor (3) is approximately 36 kg (80 lb). Remove bolts (2) and piston motor (3). Installation Procedure
Install piston motor (3) in the reverse order of removal.