HOSE 5346807 - Caterpillar

2. Loosen the nut that secures decelerator control cable to support bracket (1). Pull decelerator assembly forward away from brake pedal assembly.3. Disconnect brake control rods (2) and (3) from brake pedal assembly.4. Disconnect the steering clutch control rods (4) at both ends, and slide the rods under the fuel tank.5. Disconnect the parking brake control rod (5) from the brake pedal assembly.6. Loosen all of the fender mounting bolts on one side of the tractor.7. Attach a hoist to the brake pedal assembly, and remove pedal assembly mounting bolts and shims. Keep the shims identified as to their location.8. Move the pedal assembly forward until it clears ends of brake control rods. Remove the brake pedal assembly - weight 80 lbs. (36 kg).Install Brake Pedal Assembly
1. Attach a hoist and position the brake pedal assembly in the tractor. Install the mounting bolts and shims.2. Tighten the fender mounting bolts.3. Connect the parking brake control rod to the brake pedal assembly.4. Connect steering clutch control rods at both ends.5. Connect the brake control rods to the brake pedal assembly.6. Position the decelerator assembly, and tighten nut that secures cable to support bracket.7. Install the seat cushion assembly. Install all of the floor plates.