HOSE AS 5348889 - Caterpillar

Model Identification Number
D10R AKT188-834, 837-842,845, 846, 848-850, 852PARTS NEEDED
Quantity Part Number Description
1 5P1075 WASHER-HARD
2 5P7462 CLIP
2 5P7463 CLIP
1 5S7383 BOLT
2 6V0683 GROMMET
1 2007753 TUBE AS.
1 2007754 TUBE AS.ACTION REQUIRED
***** Parts Stock *****Remove all 2007753 (chg. 03) TUBE AS. and 2007754(chg. 01) TUBE AS. from dealer parts stock.***** Affected Product *****See the attached procedure.SERVICE CLAIM ALLOWANCES
***** Parts Stock *****Submit one claim for all 2007753 (chg. 03)Tube As. and 2007754 (chg. 01) Tube As. removed from dealer parts stock.***** Affected Product *****
Product smu/age whichevercomes first Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs
0-8000 Hours0-24 Months 100% 4 0 0 0 0
8001-12000 Hours25-48 Months 33.3% 2 0 0 50% 2
This is a 4-hour job.PARTS DISPOSITION
***** Parts Stock *****Handle the parts in accordance with your WarrantyBulletin on warranty parts handling***** Affected Product *****Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.Attach. (1-Rework Procedure)
REWORK PROCEDURE
RECOMMENDED REMOTE ATAAC HYDRAULIC TUBES ASSEMBLIESREPLACEMENT PROCEDURE:1. Park machine on level area, ground all implements,and set parking brake. Shutoff engine and Relieve all hydraulic systemresidual pressure.2. Drain hydraulic tank.3. Remove Right-hand Engine Enclosures (reference175-3656 Enclosure Gp) and lower engine plate Assemblies (reference 169-2559Hood & Guard Gp).4. Remove Right hand Exhaust piping from Mufflerto access R_ATAAC Hydraulic Tubes.5. Remove existing R_ATAAC supply and draintubes, reference 172-7852 Lines Gp-Motor.6. Install new 200-7753 and 200-7754 tube assemblieswith 5P7462 and 5P7463 Clips and 6V0683 grommets as per the attached illustration: 7. Reinstall all removed components.8. Refill hydraulic tank and check all linesfor leaks.9. Prepare machine for operation.