HOSE 5352160 - Caterpillar

29. Install two seal rings (35) onto the seal carrier. 30. Install bearing (38) into reverse clutch housing (37).31. Use tool (A), and install retaining ring (39). 32. Install Teflon seal rings (41) and (42) on pistons (40). The lips of the Teflon seal rings should be toward the housing. Make sure to put clean oil on the lip of the Teflon seal rings.33. Install piston (40) in reverse clutch housing (37). 34. Put reverse clutch housing (37) in position on tooling (E), and use wood blocks under it.35. Install coupling (43) in the reverse clutch housing.36. Put oil on O-ring seal (34) immediately before assembly. Loosen the shafts and planet carrier (17) into reverse clutch housing (37). 37. Use tool (C), and install retaining ring (44) on input shaft (3). 38. Install four discs (45) and three plates (46). Start and stop with a disc. 39. Install plate assembly (47). Install ten springs (50) and five dowels (48).40. Install four discs (49) and the three plates. Start and stop with a disc. 41. Install Teflon seal rings (52) and (54) on piston (51). The lip of the Teflon seal rings should be toward the clutch housing. Put clean oil on the lip of the Teflon seal rings.42. Install piston (51) in forward clutch housing (53). 43. Use tooling (F) to hold piston (51) in the forward clutch housing. Install tooling (G),