HOSE 5355763 - Caterpillar

Do not exceed the recommended six percent supplemental coolant additive concentration. Excessive supplemental coolant additive concentration can form deposits on the higher temperature surfaces of the cooling system, reducing the engine's heat heat transfer characteristics. Reduced heat transfer could cause cracking of the cylinder head and other high temperature components. Excessive supplemental coolant additive concentration could also result in radiator tube blockage, overheating, and/or accelerated water pump seal wear. Never use both liquid supplemental coolant additive and the spin-on element (if equipped) at the same time. The use of those additives together could result in supplemental coolant additive concentration exceeding the recommended six percent maximum.
Illustration 1 g00351795
Slowly loosen the filler cap in order to relieve the system pressure. Remove the cap.
Add supplemental coolant additive. Drain some coolant from the radiator into a suitable container in order to allow space for the extra coolant additive.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Add 0.24 L (.50 pint) of supplemental coolant additive for each 38 L (10 US gal) of cooling system capacity.
Inspect the filler cap gasket. Replace the filler cap if the gasket is damaged.
Install the filler cap.