HOSE AS 5422352 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00530467
Install pushrods (4) .Note: Ensure that the pushrods are installed in the original location and seated in the valve lifters correctly.
Illustration 2 g00530465
Install the rocker shaft assembly.
Install six rocker bracket bolts (2) and tighten the rocker bracket bolts to a torque of 15 5 N m (11 4 lb ft).Note: Rocker bracket bolts are the longer bolts.
Install six short bolts (3) and the washers. Tighten the short bolts to a torque of 15 5 N m (11 4 lb ft).
Adjust the inlet valve lash and the exhaust valve lash to 0.25 mm (0.010 inch). Refer to Testing and Adjusting, "Air Inlet and Exhaust System" for more information on setting the valve lash. Tighten adjusting screws (1) .End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".