HOSE AS 5616530 - Caterpillar

Illustration 1 g00760580
Before you change the flow mode of the hydraulic attachment circuit, place the machine in the servicing position, as shown. Stop the engine.
Table 1
Compatibility of Tool Control Systems    
Tool Control System     Single Action (Hydraulic Hammer)
    Double Action (Hydraulic Shear)    
One Pump Flow Two Pump Flow     One Pump Flow     Two Pump Flow    
Single Action Hydraulic Attachment with One Pump Flow     X                
Single Action Hydraulic Attachment with Two Pump Flow         X            
Combined Function Hydraulic Circuit with Two Pump Flow     X     X     X     X    Changing Hydraulic Attachment Circuits
Illustration 2 g00929673
This switch is located on the right instrument panel.
Work Tool Flow Mode Control - Use this switch in order to change the hydraulic attachment circuits.
Single Action Hydraulic Attachment Circuit (A) - Push the bottom portion of the switch in order to select the single action hydraulic attachment circuit.
Double Action Hydraulic Attachment Circuit (B) - Push the top portion of the switch in order to select the double action hydraulic attachment circuit. Changing Pump Flow
Illustration 3 g00929673
This switch is located on the right instrument panel.
Pump Flow Control - Use this switch in order to select the pump flow for your attachment.
One Pump Flow - Push the bottom portion of the switch in order to select one pump flow.
Two Pump Flow (B) - Push the top portion of the switch in order to select two pump flow.