HOSE ASSEM. 5K7274 - Caterpillar

Configuration Parameters
Configuration parameters concern various engine features. Some parameters can affect the performance of the engine. Most of the parameters may be programmed with an Electronic Technician (ET) service tool. Some of the parameters require a password in order to be programmed.Note: For information on programming the parameters, use the appropriate ET service tool and see the Service Manual, UENR4393, "Troubleshooting" module.Some parameters may not be available on all applications. A parameter is not available when the ET service tool indicates that the parameter is "unavailable" when the parameter is selected. Cat Monitoring System
The engine is equipped with a programmable Cat Monitoring System. The Electronic Control Module (ECM) monitors the operating parameters of the engine. The ECM can initiate responses if a specific engine parameter exceeds an acceptable range. Three possible responses may be available for each parameter: "", "DERATE" and "SHUTDOWN". Some of the responses are not available for some of the parameters. An ET service tool is used to perform the following activities:
Select the available responses.
Program the level for monitoring.
Program delay times for each response.The settings for the parameters are programmed at the factory. If the application requires the settings for the parameters to be reprogrammed, then the parameter must be programmed with an ET service tool.The screens of the ET service tool provide guidance for the programming. The following options can be programmed: "ON/OFF", "", "DERATE" and "SHUTDOWN".The screens of the ET service tool also provide guidance for changing setpoints. For information on programming the Caterpillar Monitoring System, use the appropriate ET service tool and see the Service Manual, "Troubleshooting" module.Ether Injection System
Note: This