HOSE 15.24 cm(6 in.) 5P1295 - Caterpillar

Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00959674
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (2). Remove spring (3) and plunger (4) from engine oil pump assembly (1).
Check spring (3) and plunger (4) for wear or for other damage. Plunger (4) must slide easily in engine oil pump assembly (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the spring and the plunger of the engine oil relief valve. Lubricate the spring and the plunger with clean engine oil.
Illustration 2 g00959674
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plunger (4) and spring (3) in engine oil pump assembly (1).
Install plug (2). Tighten plug (2) to a torque of 22 N m (16 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".