5T9701 HOSE AS Caterpillar parts
14G, 776C, 776D, 777D, D10N, D9L
Rating:
Alternative (cross code) number:
CA5T9701
5T-9701
5T9701
CA5T9701
5T-9701
5T9701
Weight: 0.01 pounds 0 kg.
MOTOR GRADER, TRUCK,
Compatible equipment models: 5T9701:
Number on catalog scheme:
12
For full view, you need register
Information:
Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be cleaned. Leaning the components will help to prevent dirt from entering the air conditioner system.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02729676
Open engine enclosure (1).
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct tools.
Illustration 2 g03860591
Disconnect hose assemblies (4).
Remove four bolts (3), the four washers, and refrigerant condenser (2). Installation Procedure
Install refrigerant condenser (2) in the reverse order of removal.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be cleaned. Leaning the components will help to prevent dirt from entering the air conditioner system.Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02729676
Open engine enclosure (1).
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct tools.
Illustration 2 g03860591
Disconnect hose assemblies (4).
Remove four bolts (3), the four washers, and refrigerant condenser (2). Installation Procedure
Install refrigerant condenser (2) in the reverse order of removal.
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
120B, 120G, 120H, 12G, 12H, 12H ES, 12H NA, 12M, 12M 2, 130G, 135H, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H, 163...
12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 525, 527, 52...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 163H NA, 16H, 215, 235B, 235C, 235D, 302.5, 3116, 320C, 320D FM RR, 3508C, 3512C, 3516C, 515, 521B, 522B, 525, 613B, 613C, 613C II, 613G, 621B, 621E, 621F...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K...
621B, 627F, 631D, 637D, 777C, 777D, C27, C32, CX35-P800
120G, 12G, 130G, 140G, 14G, 160G, 16G, 938F, 938G, IT38F, IT38G
120G, 16G, 621, 621B, 621R, 627, 627B, 627F, 627G, 631C, 631E, 637, 637B, 637D, 637E, 637G, 639D, 650B, 657B, 666, 666B, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 621, 621B, 621E, 623, 623B, 623E, 627, 627B, 627E, 631C, 633D, 637, 637B, 637D, 641B, 650B, 657B, 666B, 768B, 768C, 769, 769C, 769D, 771D, 772, 772B, 773, 773B, ...
120G, 130G, 621, 621B, 621E, 621R, 623, 623E, 627, 627B, 627E, 631C, 631G, 637, 637D, 637G, 641B, 657B, 768C, 769, 769C, 771C, 772B, 773B, 775B, 776, 776C, 777, 777B
14H NA, 631G, 637G, 641, 651, 657, 657B, 666, 768B, 769, 769D, 771D, 772, 772B, 773B, 773D, 773E, 775D, 775E, 776, 776C, 776D, 777, 777B, 777D, D9G, D9H
776C, 776D, 777B, 777D
120G, 12G, 130G, 140G, 14G, 160G
8X1873
HOSE AS
776C, 776D, 777D, 793D
776C, 776D, 777D, 793D
120G, 776C, 776D, 777D, 785C, 785D, 789C
8X9937
HOSE AS
776C, 776D, 777D
776C, 776D, 777D
6Y9908
HOSE AS
525B, 535B, 545, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 776C, 777D, M320
525B, 535B, 545, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 776C, 777D, M320
8X1874
HOSE AS
776C
776C
776C, 776D, 777D
8W6134
HOSE AS
120M, 12M, 322B L, 325B L, 776C, 777D
120M, 12M, 322B L, 325B L, 776C, 777D
8X7920
HOSE AS
776C, 777D, 777F
776C, 777D, 777F
1215407
HOSE AS
776C
776C
8Y4505
HOSE AS
776C, AP-1055D, BG-2455D, CP-433E, D9R
776C, AP-1055D, BG-2455D, CP-433E, D9R
8X6790
HOSE AS
768C, 772B, 776C, AP-1000B, AP-1055B, BG-2455C, BG-245C, PS-360C
768C, 772B, 776C, AP-1000B, AP-1055B, BG-2455C, BG-245C, PS-360C
8X1871
HOSE AS
776C, 776D, 777D
776C, 776D, 777D