7I7322 HOSE AS Caterpillar parts
319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D FM, 325C, 328D LCR
Rating:
Alternative (cross code) number:
CA7I7322
7I-7322
7I7322
CA7I7322
7I-7322
7I7322
Weight: 12 pounds 5 kg.
EXCAVATOR,
Compatible equipment models: 7I7322:
Number on catalog scheme:
1
For full view, you need register
Information:
Caterpillar Electronic Technician (Cat ET) Service Tool
When an abnormal operating condition of the chassis occurs, the status screen on the Cat ET indicates that there is an active event.Event codes are displayed on Cat ET in the following format:EXXXX Description of the codeThe "E" means that the code is an event code. The "XXXX" is a numeric identifier. The numeric identifier is followed by a description of the code. Active event codes are listed in ascending numerical order. The code with the lowest number is listed first. The active event code is removed from the list when the condition is no longer present.Logged Event Codes
Some event codes are logged in the ECM memory. Some event codes are active only. The logged event codes are listed in chronological order. The most recent code is listed first.A logged code is cleared from memory when one of the following conditions occur:
The service technician manually clears the code.
The code does not reoccur for 1000 hours.
A new code is logged and there are already ten logged codes in memory. In this case, the oldest logged code is cleared.Note: Always clear logged event codes after investigating and correcting the problem which generated the code.Troubleshooting
Perform the following steps in order to troubleshoot an event:
Obtain the following information from the operator:
The event and the time of the event
Determine the engine operating conditions at the time of the event. Conditions such as engine rpm and load may be important.
Determine if there are any systems that were installed by the dealer or by the customer that could cause the event.
Verify that the event is not due to normal machine operation. Verify that the event is not due to error of the operator.
Check all fluid levels and all oil levels.
Troubleshoot and repair any active diagnostic codes. List of Event Codes For the Transmission ECM
The following table lists the event codes that apply to the control system of the transmission. The recommended response is listed. Use the Cat ET service tool in order to determine the event codes that are active or logged.
Table 2
List of Event Codes (EID) For the Transmission/Chassis ECM
EID Level Description Possible Cause and Recommended Response
0047 2 "Abuse Shift" Warning Reduce the speed of the engine before attempting to shift through neutral or shift from neutral.
0049 2-S "Coasting in Neutral" Warning Reduce the output speed of the transmission to less the 10 MPH. (Apply the Brake.)
0084 2-S "Machine Overspeed" Warning Reduce the speed of the engine to less than 67.5 KM/H.
0108 2 Upshift The Machine In Order To Prevent Engine Overspeed. Upshift the transmission in order to prevent overspeed.
0113 3 High Transmission Oil Pressure If the Transmission Oil Pressure exceeds 650 kPa for more than 2 seconds, a level 3 logged event is generated. The machine should be safely shut down immediately.
0153 2-S
When an abnormal operating condition of the chassis occurs, the status screen on the Cat ET indicates that there is an active event.Event codes are displayed on Cat ET in the following format:EXXXX Description of the codeThe "E" means that the code is an event code. The "XXXX" is a numeric identifier. The numeric identifier is followed by a description of the code. Active event codes are listed in ascending numerical order. The code with the lowest number is listed first. The active event code is removed from the list when the condition is no longer present.Logged Event Codes
Some event codes are logged in the ECM memory. Some event codes are active only. The logged event codes are listed in chronological order. The most recent code is listed first.A logged code is cleared from memory when one of the following conditions occur:
The service technician manually clears the code.
The code does not reoccur for 1000 hours.
A new code is logged and there are already ten logged codes in memory. In this case, the oldest logged code is cleared.Note: Always clear logged event codes after investigating and correcting the problem which generated the code.Troubleshooting
Perform the following steps in order to troubleshoot an event:
Obtain the following information from the operator:
The event and the time of the event
Determine the engine operating conditions at the time of the event. Conditions such as engine rpm and load may be important.
Determine if there are any systems that were installed by the dealer or by the customer that could cause the event.
Verify that the event is not due to normal machine operation. Verify that the event is not due to error of the operator.
Check all fluid levels and all oil levels.
Troubleshoot and repair any active diagnostic codes. List of Event Codes For the Transmission ECM
The following table lists the event codes that apply to the control system of the transmission. The recommended response is listed. Use the Cat ET service tool in order to determine the event codes that are active or logged.
Table 2
List of Event Codes (EID) For the Transmission/Chassis ECM
EID Level Description Possible Cause and Recommended Response
0047 2 "Abuse Shift" Warning Reduce the speed of the engine before attempting to shift through neutral or shift from neutral.
0049 2-S "Coasting in Neutral" Warning Reduce the output speed of the transmission to less the 10 MPH. (Apply the Brake.)
0084 2-S "Machine Overspeed" Warning Reduce the speed of the engine to less than 67.5 KM/H.
0108 2 Upshift The Machine In Order To Prevent Engine Overspeed. Upshift the transmission in order to prevent overspeed.
0113 3 High Transmission Oil Pressure If the Transmission Oil Pressure exceeds 650 kPa for more than 2 seconds, a level 3 logged event is generated. The machine should be safely shut down immediately.
0153 2-S
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3,...
229D, 320C, 320C FM, 320C L, 320D, 322B L, 323D L, 323D LN, 3406, 3406B, 3406C, 3408, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 785, 797, 797B,...
307B, 311B, 312B, 312B L, 313B, 315, 317, 320, 320 L, 320B, 320B FM LL, 320N
307C, 308D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 315C, 315D L, 316E L, 318C, 318E L, 319D, 319D L, 320B, 320C, 32...
307C, 307D, 307E, 311C, 311D LRR, 311F LRR, 312D, 312D L, 314C, 314D LCR, 314E LCR, 320B, 320C, 320C FM, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B, 322B LN...
311D LRR, 311F LRR, 312C L, 315C, 318C, 320B, 320C, 320C L, 320D, 320D L, 320E LRR, 321C, 321D LCR, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 32...
314C, 320B, 320B L, 320C, 320C FM, 320C L, 330 FM L, 330 L, 330B, 330B L, W330B
312E, 312E L, 314E CR, 314E LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D L...
320 L, 320B, 320C, 322 L, 322B, 322B L, 322C, 322C FM, 324D L, 325, 325 L, 325B L, 325C, 325C L, 325D L, 329D, 329D L, 329D LN, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 365B, W345B II
320C, 320C FM, 320C L
320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 325C, 330B L, 330C L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 350
3054741
HOSE AS
319D, 319D L, 319D LN
319D, 319D L, 319D LN
3054708
HOSE AS
319D, 319D L, 319D LN
319D, 319D L, 319D LN
2699696
HOSE AS
319D L, 319D LN
319D L, 319D LN
2282093
HOSE AS
319D L, 319D LN
319D L, 319D LN
3636197
HOSE AS
319D, 319D L, 319D LN, 374D L
319D, 319D L, 319D LN, 374D L
319D, 319D L, 319D LN, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324E, 325C FM, 330C FM
1723321
HOSE AS
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
3084170
HOSE AS
315D L, 319D, 319D L, 319D LN
315D L, 319D, 319D L, 319D LN
3057290
HOSE AS
319D, 319D LN
319D, 319D LN
3057289
HOSE AS
319D, 319D LN
319D, 319D LN
3039254
HOSE AS
319D, 319D LN
319D, 319D LN
3321365
HOSE AS
319D, 319D L, 319D LN
319D, 319D L, 319D LN