HOSE ASSEM. 8K7226 - Caterpillar

3408E
Illustration 1 g00837363
Note: Use 6V-4876 Lubricant on the bolt threads.The tightening sequence for the cylinder head bolts follows:
In a numerical sequence, tighten bolts 1 through 18.Torque for bolts ... 270 15 N m (199 11 lb ft)
In a numerical sequence, tighten bolts 1 through 18.Torque for bolts ... 450 15 N m (332 11 lb ft)
In a numerical sequence, again tighten bolts 1 through 18.Torque for bolts ... 450 15 N m (332 11 lb ft)
In a numerical sequence, tighten nuts 19 through 27.Torque for nuts ... 45 7 N m (33 5 lb ft) (28) Tighten the exhaust manifold studs that are in each cylinder head to the following torque. ... 35 5 N m (26 4 lb ft)
Illustration 2 g00673763
(29) Height of new cylinder head ... 112.78 0.25 mm (4.440 0.010 inch)
Illustration 3 g00673772
Note: Use 6V-6640 RTV Silicone Sealant on the plugs. (30) The plugs are installed into the cylinder head at the following depth. ... 4.5 0.5 mm (0.18 0.02 inch) (31) The plugs are installed into the cylinder head at the following depth. ... 2.0 0.5 mm (0.08 0.02 inch)
Illustration 4 g00673822
Note: Use 5P-3931 Anti-Seize Compound on the threads of the injector sleeve. (32) Tighten the injector sleeve to the following torque. ... 100 10 N m (74 7 lb ft)3412E
Illustration 5 g00978802
Note: Use 6V-4876 Lubricant on the bolt threads.The tightening sequence for the cylinder head bolts follows:
In a numerical sequence, tighten bolts 1 through 26.Torque for bolts ... 270 15 N m (199 11 lb ft)
In a numerical sequence, tighten bolts 1 through 26.Torque for bolts ... 450 15 N m (332 11 lb ft)
In a numerical sequence, again tighten bolts 1 through 26.Torque for bolts ... 450 15 N m (332 11 lb ft)
In a numerical sequence, tighten nuts 27 through 39.Torque for nuts ... 45 7 N m (33 5 lb ft) (40) Tighten the exhaust manifold studs that are in each cylinder head to the following torque. ... 35 5 N m (26 4 lb ft)
Illustration 6 g00673763
(29) Height of new cylinder head ... 112.78 0.25 mm (4.440 0.010 inch)
Illustration 7 g00673772
Note: Use 6V-6640 RTV Silicone Sealant on the plugs. (30) The plugs are installed into the cylinder head at the following depth. ... 4.5 0.5 mm (0.18 0.02 inch) (31) The plugs are installed into the cylinder head at the following depth. ... 2.0 0.5 mm (0.08 0.02 inch)
Illustration 8 g00673822
Note: Use 5P-3931 Anti-Seize Compound on the threads of the injector sleeve. (32) Tighten the injector sleeve to the following torque. ... 100 10 N m (74 7 lb ft)