HOSE AS-FLEXIBLE 8S2387 - Caterpillar

"Aftertreatment Regeneration Device Vehicle Speed Threshold"
Active regeneration is inhibited when the vehicle speed falls below the value of this parameter.Note: This parameter is not available in newer software versions. Active regenerations are inhibited when the vehicle speed falls below 32 km/h (20 mph) on newer software versions.
Table 1
Default Minimum Maximum
8 km/h (5 mph) 0 km/h (0 mph) 204 km/h (127 mph) "Aftertreatment Regeneration Disable Switch Configuration"
This parameter identifies the Engine Control Module (ECM) connection for the "Aftertreatment Regeneration Disable Switch".
Table 2
Default Alternatives
Not Programmed J1/P1-6, 7, 22, 23, 45, 40, 44, 45, 46, 47, 56, 58, 59, 60
J1939 Body Controller
J1939 Cab Controller
J1939 Instrument Cluster "Aftertreatment Regeneration Force Switch Configuration"
This parameter identifies the ECM connection for the "Aftertreatment Regeneration Force Switch".
Table 3
Default Alternatives
Not Programmed J1/P1-6, 7, 22, 23, 45, 40, 44, 45, 46, 47, 56, 58, 59, 60
J1939 Body Controller
J1939 Cab Controller
J1939 Instrument Cluster "Diesel Particulate Filter Lamp Configuration"
This parameter identifies the ECM connection for the "Diesel Particulate Filter Lamp".
Table 4
Default Alternatives Output
J1/P1:31 J1/P1: 10, 11, 12, 13, 19, 20 High Side Driver
J1/P1: 29, 30, 31 Low Side Driver "Diesel Particulate Filter Lamp Vehicle Speed Threshold"
The "Diesel Particluate Filter Lamp" and the "High Exhaust Temperature Lamp" are illuminated when the vehicle speed falls below the value of this parameter.Add additional paras for detailed operation.
Table 5
Default Minimum Maximum
32 km/h (20 mph) 32 km/h (20 mph) 204 km/h (127 mph) "High Exhaust System Temperature Lamp Configuration"
This parameter identifies the ECM connection for the "High Exhaust System Temperature Lamp".
Table 6
Default Alternatives Output
J1/P1:30 J1/P1: 10, 11, 12, 13, 19, 20 High Side Driver
J1/P1: 29, 30, 31 Low Side Driver "High Exhaust System Temperature Lamp Diesel Particulate Filter Outlet Temperature Threshold"
The "High Exhaust System Temperature Lamp" is illuminated whenever the outlet temperature of the diesel particulate filter exceeds the value of this parameter.
Table 7
Default Minimum Maximum
400 °C (752 °F) 400 °C (752 °F) 750 °C (1382 °F) "High Exhaust System Temperature Lamp Strategy"
This parameter defines the operation of the "High Exhaust System Temperature Lamp"."Diesel Particulate Filter Outlet Temperature" - The "High Exhaust System Temperature Lamp" is illuminated whenever the outlet temperature of the particulate filter exceeds the value of the "High Exhaust System Temperature Lamp Diesel Particulate Filter Outlet Temperature Threshold" parameter.
Table 8
Default Alternative
Diesel Particulate Filter Outlet Temperature - "Aftertreatment Regeneration Device Fan Enable Vehicle Speed Threshold"
The cooling fan will operate when the vehicle speed goes below the value of this parameter and an active regeneration is occurring.Note: The ECM must control the cooling fan in order for this parameter to affect the operation of the cooling fan.
Table 9
Default Minimum Maximum
32 km/h (20 mph) 32 km/h (20 mph) 204 km/h (127 mph) "Aftertreatment Regeneration Device Stationary Regeneration Strategy"
This parameter allows the operator to force an active