HOSE 8T9543 - Caterpillar

There may be several specific symbols on the UPS. The descriptions of the symbols are reviewed in this section. Become familiar with all of the symbols.Ensure that all of the symbols are legible. Clean the symbols or replace the symbols if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the symbols. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the symbols. The symbols that are loosened could drop off the UPS.Replace any symbol that is damaged or missing. If a symbol was attached to part of the UPS that was replaced, install a new symbol on the replacement part. Your Caterpillar dealer can provide new symbols.
Ground
Caution - Refer to the manual for more information.
Risk of electric shock
Input
Output
Alternating Current
Phase
Negative Terminal
Positive Terminal
DC Current
Neutral
Caution - Refer to the Service Manual.
No Service
Read Service Manual
Telecommunication Connection
No Connection (Telephone) - This is not a connection for a telecommunication network.
High Leakage Current - A connection to earth ground is essential before connecting the supply.
Lithium Battery - There is danger of explosion if the battery is incorrectly replaced. Replace the battery with the same type of battery or replace the battery with an equivalent battery. Dispose of the batteries according to the manufacture's instructions.
Bypass Input
Bypass Input Switch
The heat sink or the bracket is not grounded - Test before touching.
Safety - Extra Low Voltage connections only
Wait for five minutes after disconnecting all sources of power before the removal of covers or panels.
Illustration 1 g01019579
This Module is Part of The UPS 1000 and The UPS 1200.
Illustration 2 g01019596
Warning (Bypass Switch)
Illustration 3 g00785185
This System is for use with a Three-Wire Grounded Wye Star Service.
Illustration 4 g00785207
This System is for use with a Delta Service.
Illustration 5 g01019615
This System is for use with a Impedance Grounded Service.
Illustration 6 g00785208
This System is for use with a Impedance Grounded Service.
Illustration 7 g00785212
The UPS Receives Power From Multiple Sources.
Illustration 8 g00785215
Bypass Switch
Illustration 9 g00785216
Input Isolation Switch
Illustration 10 g00785218
Output Isolation Switch
Illustration 11 g00785222
"ON" Symbol
Illustration 12 g00785223
"OFF" Symbol