HOSE AS 8X1820 - Caterpillar

Remove piston assembly (27) and swashplate (28) .
Illustration 15 g01325548
Remove seals (29) and block (30) .
Illustration 16 g01325550
Remove bearings (31) from swashplate (28) .
Illustration 17 g01325554
Remove shaft assembly (32) .
Illustration 18 g01325562
Use Tooling (A), Tooling (B), and a suitable press in order to remove bearing (33) from the shaft assembly.
Illustration 19 g03825226
Remove barrel assembly (34) .
Illustration 20 g01325566
Remove pistons (35), retainer (36), and bearing (37) .
Illustration 21 g01325568
Remove pins (38) .
Illustration 22 g01325569
Illustration 23 g01325570
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (C) in order to remove retaining ring (39) .
Remove retainer (43), spring (42), and washer (41), from barrel (40) .
Illustration 24 g01325572
Remove port plate (45) and gasket (44) .
Remove coupling (46) .
Illustration 25 g01325573
Remove head (47) .
Repeat Step 26 for head (47) .
Remove bearings (48) .
Illustration 26 g01325574
Remove barrel assembly (49) .
Repeat Step 13 through Step 19 and Step 22 through Step 25.
Illustration 27 g01375101
Remove retaining ring (56) .
Remove plate (55) .
Remove O-ring seal (54) .
Remove seal (53), shaft assembly (50), and retaining ring (52) .
Use Tooling (B) and a suitable press in order to remove bearing (51) .