HOSE AS 8X7989 - Caterpillar

start by:a) remove radiator and guard 1. Remove the wire and remove fan (1) from the radiator. 2. Remove nuts (3) and washers. Remove ether valve assembly (2) and bracket from the radiator guard as a unit. 3. Disconnect clips (6) from the radiator. Remove tube (5).4. Remove bolts (4). Remove shield assembly (7) from the radiator. 5. Fasten tooling (A) and a hoist to the radiator. Remove four bolts (9). Remove radiator assembly (8) from the guard assembly. The weight of the radiator assembly is 120 lb. (54 kg).Install Radiator
1. Fasten tooling (A) and a hoist to the radiator. Put radiator assembly (1) in position in the guard assembly. Install the bolts that hold it. 2. Install shield assembly (2) on the radiator. It can be necessary to make an adjustment to the location of the shield assembly on the radiator after the radiator and guard are installed on the frame. The clearance between the fan and shield assembly (2) must be equal on the top and bottom of the shield assembly with a minimum of .394 in. (10.0 mm) of clearance. 3. Install tube (5) on the radiator. Connect two clips (4).4. Install ether valve assembly (3) and bracket on the guard assembly. 5. Put fan (6) in position against the radiator core. Fasten a wire to the fan and shield assembly so the fan can not fall when the radiator and guard are installed on the frame.
Do not cause damage to the radiator core when the fan is put against it.
end by:a) install radiator and guard