HOSE 9M5411 - Caterpillar

Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 3
B - Loctite 5127 - Note: Cleanliness is an important factor. Before assembly, all parts should be cleaned thoroughly in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g03367344
Apply a continuous bead of Tooling (B) to the face of the transfer gears housing (7) before mating transmission (4) to the transfer gears housing (7).
Use Tooling (A) and a suitable lifting device to position transmission (4), as shown. The weight of transmission (3) is approximately 425 kg (936 lb).
Illustration 2 g02162314
Illustration 3 g02161929
Apply Tooling (B) to both sides of the washers before installing them onto bolts (5) and (6). Install bolts (5) and (6) that connect transmission (4) to transfer gears (7). Tighten bolts (5) and (6) to a torque of 120 20 N m (90 15 lb ft).
Illustration 4 g03367336
Connect harness assembly (3).
Illustration 5 g03367331
Install tube assembly (2) and bolts (1).End By:
Connect the torque converter to the transmission.