HOSE A 9P9573 - Caterpillar

Do not operate the machine with the guard in the lowered position. Damage to the machine or actuator could result.
The guard is heavy. Personal injury or death may result from being struck by or trapped under the guard. Do not allow anyone to work near or under the machine when the guard is being raised or lowered.
Illustration 1 g06037902Guards
The guards on this machine do not have a hinge to support the guards. The guards are held in position by retaining bolts and washers.Lowering the Guards
Position a suitable jack under the guard to lower the guard. The head of the jack should be touching the guard.
Stay clear of the area beneath the guard. Remove retaining bolts that secure the guard.
Lower the guard until the guard is resting on a suitable support.Raising the Guards
Position a suitable jack beneath the guard.
Stay clear of the area beneath the guard. Raise the guard with the jack until the guard is in proper position and contacts the frame of the machine.
Install retaining bolts and washers to secure the guard in position. Tighten the retaining bolts properly.
Remove the jack from beneath the guard.