HOSE AS 9R6776 - Caterpillar

Illustration 1 g00632231
Electromechanical Control Panel with Automatic Start/Stop (1) AC voltmeter (VM) (2) Frequency meter (FM) (3) AC ammeter (AM) (4) Lamp test switch (5) Pump stop switch (6) Starting aid switch (SAS) (7) Pump run switch (8) Speed potentiometer (SP) (9) Voltage adjust rheostat (VAR) (10) Ammeter-voltmeter phase selector switch (AVS) (11) Water temperature gauge (WTG) (12) DC voltmeter (DCV) (13) Oil pressure gauge (OPG) (14) Service hour meter (15) Emergency stop push button (ESPB) (16) Horn (17) Alarm silence switch (18) Engine control switch (ECS) (19) Fault indicatorsThe electromechanical control panel is located above the generator distribution housing. The electromechanical control panel is shown in Illustration 1. The optional controls on the control panel are listed below.
pump stop switch
starting aid switch
pump run switch
speed potentiometer
governor switch
horn
alarm silence switchNote: The governor switch can be mounted in the location of the speed potentiometer (8) .The control panel controls the devices which are needed to operate the engine and the generator. The control panel monitors the devices which are needed to operate the engine and the generator. The control panel protects the devices which are needed to operate the engine and the generator. Below, you will find the descriptions of the control devices. Refer to Illustration 1.AC Voltmeter (1) - The AC voltmeter (VM) shows the voltage between phases T1 and T2, phases T2 and T3, or phases T3 and T1. The ammeter-voltmeter phase selector switch (10)