HOSE AS 9W3219 - Caterpillar

Illustration 1 g02293405
Engine Serial Number
The engine serial number plate (1) is located on the bottom right rear of the cylinder block.
Illustration 2 g01211121
Engine Serial Number ____________________Drawworks Serial Number
The DSN (2) is located on the vertical wall of the winch frame near the bottom drum. Do not operate or service the winch unless you first read the "Operation and Maintenance Manual" with understanding the instructions for the safe operation of the winch.
Illustration 3 g02761700
Illustration 4 g02761758
Model ____________________Drawworks Serial Number____________________Service Information Number
The SIN (3) is located on the front of the left-hand console.
Illustration 5 g01211054
Service Information Number Plate (SIN) ____________________Machine PIN
The plate for Machine PIN (4) is located on the rear of the machine on the left-hand rear of the case.
Illustration 6 g01188096
Machine PIN location
Illustration 7 g02436556
For quick reference, record this information in the spaces provided below.
Model Number (A)____________________
Product Identification Number (B)____________________
Service Information Plate (C)____________________
Year of Manufacture (If required) (D)____________________
CE Plate (If required) (E)____________________
Country of Origin (If required) (F)____________________Local regulations may require documentation of Year of Manufacture in the OMM. Comply with these regulations.Transmission Serial Number
The transmission serial number (5) is located at the rear of the machine on the transmission cover.
Illustration 8 g01188054
Transmission Serial Number ____________________European Union
For machines compliant to "2006/42/EC", the following information is stamped onto the "CE" plate.
Illustration 9 g01883459
For a quick reference, record this information in the spaces provided below.
Engine Power primary engine (kW)____________________
Engine Power for additional engine if equipped (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year of construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.Certifications
ROPS
Illustration 10 g01323621
Illustration 11 g02739498
This film is located on the ROPS above the operator station or the cab.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.