HOUSING AS-CLUTCH 1083322 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9900     Hydraulic Cylinder Repair Stand     1    
B     9U-7868     Spanner Wrench     1    
127-8064 Plate Group     1    Start By:
Remove the backhoe bucket cylinder from the machine. Refer to Disassembly and Assembly, "Backhoe Bucket Cylinder - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Place the backhoe bucket cylinder in position on Tooling (A) .
Illustration 1 g00778008
Use Tooling (B) to remove cylinder head (10) from cylinder body (6) .
Pull cylinder head (10) and cylinder rod (7) from cylinder body (6) .
Remove bolt (1) , washer (2) , and piston (5) from cylinder rod (7) .
Remove seal (3) and ring (4) from piston (5) .
Hand tighten cylinder head (10) onto cylinder body (6) .
Pull cylinder rod (7) out of cylinder head (10) .
Remove cylinder head (10) from cylinder body (6) .
Remove ring (9) , ring (14) , seal (8) , seal (11) , seal (12) , and seal (13) from cylinder head (10) .