HOUSING GP-FIXED AXLE 1120769 - Caterpillar

Disassembly Procedure
Start By:
Remove the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00705531
Use a screwdriver or a similar tool to remove retaining ring (6) from both ends of the rocker shaft assembly.
Remove rocker lever (5) from the rocker shaft.
Remove rocker shaft bracket (4) from the rocker shaft.
Remove spacer (3) and spring (2) from the rocker shaft (1) .Note: Place an identification mark on each of the components for installation.Note: The rocker shaft bracket (4) on newer engines is a split assembly.