HOUSING-TORQUE CONVERTER 1173597 - Caterpillar

Illustration 6 g01173705
Remove bolt (13). Remove bolts (11) and place transmission oil filter assembly (12) to the side.
Illustration 7 g01173719
Illustration 8 g01173728
Remove bolts (16) and the washers that secure support (10) to the frame. Move clip (14) and harness assembly (15) aside. Move clip (18) and harness assembly (17) aside.
Illustration 9 g00798989
Remove aftercooler (4) from the machine. The weight of aftercooler (4) is approximately 70 kg (154 lb).
Illustration 10 g01173734
Place the aftercooler on a suitable clean surface and remove four bolts (19), the large washers and the small washers.
Illustration 11 g01173738
Attach a suitable lifting device to support (10). Carefully lift support (10) with gear motor (9), fan guard (21) and fan spider (20) from aftercooler (4) .
Illustration 12 g01173741
Remove bolts (25), the washers, the spacers and the nuts in order to remove plate (24) and baffle (23). Remove shroud (22) from aftercooler (4) .
Illustration 13 g01173744
Remove four foam strips (26) .
Illustration 14 g01173745
Remove four mounts (27) from support (10) .
Illustration 15 g01173747
Remove bolts (28) and the washers in order to remove spider (20) .
Illustration 16 g01173748
Remove bolts (29) and the washers that secure gear motor (9) to support (10). Remove the gear pump from the support.
Illustration 17 g01173749
Remove locknut (30) and washer (31) from gear motor (9) .
Illustration 18 g01173755
Use Tooling (A) in order to remove adapter (32) from motor (9) .
Illustration 19 g01173758
Illustration 20 g01173761
Remove three bolts (33), the washers and the spacers. Remove four bolts (34), the washers and the nut in order to remove fan guard (21) from support (10) .