HOUSING AS 1241432 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06013346
Remove bolts (1) and open grill assemblies (2).
Illustration 2 g06013348
Remove bolts (3) and remove baffles (4).
Illustration 3 g06013350
Disconnect hose (5).
Remove bolts (6) to disconnect elbow (7).
Loosen clamp (9).
Remove three bolts (8) to remove housing (10).
Illustration 4 g06027556
Remove bolts (11).
Remove bolts (12) to remove water pump (13).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g06013351
Position water pump (13) and install bolts (12).
Install bolts (11).
Illustration 6 g06013350
Position housing (10) and install bolts (8).
Tighten clamp (9) to a torque of 11 N m (97 lb in).
Position elbow (7) and install bolts (6).
Connect hose (5). Tighten the clamp to a torque of 11 N m (97 lb in).
Illustration 7 g06013348
Position baffles (4) and install bolts (3).
Illustration 8 g06013346
Close grill assemblies (2) and install bolts (1).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".