1244347 HOUSING-TIMING GEAR Caterpillar parts
631E, 69D, 836, AD40, AD45, AE40, AE40 II, D10R, D9R
Rating:
Alternative (cross code) number:
CA1244347
124-4347
1244347
CA1244347
124-4347
1244347
Weight: 77 pounds 34 kg.
LANDFILL COMPACTOR, WHEEL TRACTOR,
Compatible equipment models: 1244347:
Information:
Removal Procedure
Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Remove the housing for the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00541252
Remove socket head bolts (1) from the bridge.
Remove bridge (2) from the cylinder block.
Illustration 2 g00572309Note: Inspect the main bearing caps and the connecting rod caps for the proper identification mark. The identification marks should give the location and the direction of the bearings in the engine.
Remove main bearing cap bolts (3).
Remove main bearing caps (4) from the cylinder block.
Remove the lower main bearings and the lower thrust washers. Keep the lower main bearings with the respective main bearing cap.
Illustration 3 g00541254Note: The connecting rod caps are held on the connecting rod with bolts that are threaded into the connecting rod.
Remove bolts (5) from the connecting rods.
Remove connecting rod caps (6) from the connecting rods.
Remove the bearings from connecting rod caps (6). Keep the connecting rod bearings with the respective connecting rod cap.
Do not allow the connecting rods to strike the piston cooling jets. Damage or misalignment may occur.
Push the piston assemblies into the cylinder bores.
Illustration 4 g00572311
Attach lifting straps and a suitable lifting device to crankshaft (7).
Lift crankshaft (7) out of the cylinder block. The weight of the crankshaft is approximately 39 kg (85 lb). Do not scratch any of the finished surfaces on the crankshaft.
Illustration 5 g00541257
Remove upper main bearings (8) and upper thrust washers (9).
Start By:
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Remove the housing for the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00541252
Remove socket head bolts (1) from the bridge.
Remove bridge (2) from the cylinder block.
Illustration 2 g00572309Note: Inspect the main bearing caps and the connecting rod caps for the proper identification mark. The identification marks should give the location and the direction of the bearings in the engine.
Remove main bearing cap bolts (3).
Remove main bearing caps (4) from the cylinder block.
Remove the lower main bearings and the lower thrust washers. Keep the lower main bearings with the respective main bearing cap.
Illustration 3 g00541254Note: The connecting rod caps are held on the connecting rod with bolts that are threaded into the connecting rod.
Remove bolts (5) from the connecting rods.
Remove connecting rod caps (6) from the connecting rods.
Remove the bearings from connecting rod caps (6). Keep the connecting rod bearings with the respective connecting rod cap.
Do not allow the connecting rods to strike the piston cooling jets. Damage or misalignment may occur.
Push the piston assemblies into the cylinder bores.
Illustration 4 g00572311
Attach lifting straps and a suitable lifting device to crankshaft (7).
Lift crankshaft (7) out of the cylinder block. The weight of the crankshaft is approximately 39 kg (85 lb). Do not scratch any of the finished surfaces on the crankshaft.
Illustration 5 g00541257
Remove upper main bearings (8) and upper thrust washers (9).
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
9W2979
HOUSING AS-ROTATION
589, D10N, D8L, D9N, D9R
589, D10N, D8L, D9N, D9R
3T2139
HOUSING AS-CLUTCH
24H, 24M, 589, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 836, 980G, 988F, 988F II, AD30, D10N, D350E, D350E II, D400, D400E, D44B, D550B, D8L, D9L, D9N, D9R, R29...
24H, 24M, 589, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 836, 980G, 988F, 988F II, AD30, D10N, D350E, D350E II, D400, D400E, D44B, D550B, D8L, D9L, D9N, D9R, R29...
7G5746
HOUSING-CLUTCH
589, 824C, 824G, 825G, 826C, 826G, 834B, 834G, 834H, 836, 836G, 836H, 980G, 983B, 986H, 988F, 988F II, 988G, 988H, AD30, D350E, D350E II, D400, D400E, D44B, D550B, D8L, D9L, D9N, D9R, D9T, R2900, R290...
589, 824C, 824G, 825G, 826C, 826G, 834B, 834G, 834H, 836, 836G, 836H, 980G, 983B, 986H, 988F, 988F II, 988G, 988H, AD30, D350E, D350E II, D400, D400E, D44B, D550B, D8L, D9L, D9N, D9R, D9T, R2900, R290...
3P2791
HOUSING-CLUTCH
589, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 983B, 986H, 988B, 988F, 988...
589, 824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 983B, 986H, 988B, 988F, 988...
1T0669
HOUSING
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633E II, 637D, 637E, 637G, 657B, 657E, 657G, ...
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633E II, 637D, 637E, 637G, 657B, 657E, 657G, ...
1017517
HOUSING
631E, 657E, 657G, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772G, 772G OEM
631E, 657E, 657G, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772G, 772G OEM
6Y8675
HOUSING AS
631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, AD55B, AD60
631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, AD55B, AD60
6T5631
HOUSING-SENSOR
621E, 621F, 623E, 631E, 637E, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 785, 793C, AD40, AD45, AE40, AE40 II, D250E, D250E II, D300E, D300E II, D400...
621E, 621F, 623E, 631E, 637E, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 785, 793C, AD40, AD45, AE40, AE40 II, D250E, D250E II, D300E, D300E II, D400...
3P2761
HOUSING-CLUTCH
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 986H, 988B, 988F, 988F II, 988G,...
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 986H, 988B, 988F, 988F II, 988G,...
3P2413
HOUSING-CLUTCH
980F, 980G, 980G II, D10N, D9R, D9T
980F, 980G, 980G II, D10N, D9R, D9T
1340039
HOUSING
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980G, 986H, 988F II, 988G, 988H, 988K
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980G, 986H, 988F II, 988G, 988H, 988K
4P8733
HOUSING
D8L, D9N, D9R
D8L, D9N, D9R
1458426
HOUSING
631E, 631G, 637E, 637G
631E, 631G, 637E, 637G
7G8148
HOUSING AS
120G, 12G, 130G, 140G, 631E, 926, 936, 936F, D350E II, D400E II, G936, IT28, IT28B
120G, 12G, 130G, 140G, 631E, 926, 936, 936F, D350E II, D400E II, G936, IT28, IT28B
2053210
HOUSING AS-OSCILLATING AXLE
928G, 928H, 928HZ, 930G, IT28G
928G, 928H, 928HZ, 930G, IT28G
1173320
HOUSING
928G, IT28G
928G, IT28G
2053211
HOUSING AS-FIXED AXLE
928G, 928H, 928HZ, 930G, IT28G
928G, 928H, 928HZ, 930G, IT28G
1173319
HOUSING-FIXED AXLE
928G, 928H, 928HZ, IT28G
928G, 928H, 928HZ, IT28G
1768210
HOUSING AS-TURBINE
525B, 535B, 938G, 950G, 962G, IT38G, IT62G
525B, 535B, 938G, 950G, 962G, IT38G, IT62G
1325234
HOUSING-WATER REGULATOR
950G, 962G, IT62G
950G, 962G, IT62G
9J3602
HOUSING-EJECTOR
633D, 633E II
633D, 633E II
1119102
HOUSING
633E II
633E II
1311537
HOUSING AS
633E II
633E II
2W5698
HOUSING
24H, 651E, 657E, D10N, D9L
24H, 651E, 657E, D10N, D9L