HOUSING AS 1285691 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1859 Retaining Ring Pliers 1 Start By:
Remove the steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".
Illustration 1 g03708099
Remove the screws and plate assembly (1).
Remove the screws and plate assembly (2).
Illustration 2 g03708106
Tilt control panel (4) towards the seat. Remove the screws and cover assembly (3).
Illustration 3 g03708108
Loosen the screw and disconnect harness assembly (5) from control panel (4).
Illustration 4 g03708109
Remove the screws and cover assembly (6).
Illustration 5 g03708110
Remove six bolts (7) and control panel (4).
Illustration 6 g03708111
Remove the cable straps securing harness assembly (5) to steering column (8).
Remove the bolts and steering column (8).
Illustration 7 g03709556
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tool (A) to remove clip. Remove the bolt, the clip, and strut (9) from steering column (8). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1P-1859 Retaining Ring Pliers 1
Install steering column (8) in the reverse order of removal. End By:
Install the steering wheel. Refer to Disassembly and Assembly, "Steering Wheel - Remove and Install".