HOUSING-BRA 1561934 - Caterpillar

Remove caps (4).
Illustration 3 g01358301
Remove mirror (5).
Illustration 4 g01358307
Remove control assembly (6).
Illustration 5 g01358310
Remove cover (7).
Illustration 6 g01358311
Remove screws (8).
Illustration 7 g01358344
Disconnect harness assembly (9).
Illustration 8 g01358377
Illustration 9 g01358396
Remove nuts (10) in order to remove wiper motor (11). Installation Procedure
Illustration 10 g01358396
Illustration 11 g01358377
Position wiper motor (11). Install nuts (10). Tighten nuts (10) to a torque of 38 2 N m (28 2 lb ft).
Illustration 12 g01358344
Connect harness assembly (9).
Illustration 13 g01358311
Install screws (8).
Illustration 14 g01358310
Install cover (7).
Illustration 15 g01358307
Install control assembly (6).
Illustration 16 g01358301
Install mirror (5).
Illustration 17 g01358287
Install caps (4).
Illustration 18 g01358281
Install window wiper (3). Install nuts (2). Tighten nuts (2) to a torque of 23 1 N m (17 1 lb ft). After approximately 30 minutes, tighten nuts (2) to a torque of 23 1 N m (204 9 lb in). Note: Nuts (2) must maintain a torque of 12 N m (106 lb in) minimum.
Connect hose (1).