1642888 HOUSING-BEARING Caterpillar parts
CP-663E, CP-76, CS-663E, CS-683E, CS-74B, CS-76B, CS-78B
Rating:
Alternative (cross code) number:
CA1642888
164-2888
1642888
CA1642888
164-2888
1642888
Weight: 277 pounds 125 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 1642888:
Number on catalog scheme:
11
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-3145 Load Leveler 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00718508
Illustration 2 g00487660
Attach tooling (A) to the swing post and attach tooling (A) to the underside of the counterweight. Place the upper structure on the undercarriage frame. The weight of the upper structure is approximately 700 kg (1540 lb).
Illustration 3 g00487990
Apply 4C-4032 Bearing Mount Compound to 14 bolts (5). Install 14 bolts (5) and washers. Tighten the bolts to a torque of 83 9 N m (61 6.5 lb ft).
Illustration 4 g00487591
Install the bolt (4) and the washer.
Illustration 5 g00487586
Install the two bolts (3) and the washers.
Illustration 6 g00487523
Install four bolts (2) and washers.
Illustration 7 g00487475
Connect the eight hose assemblies (1) with the swivel.,,, End By:
Install the fuel tank. Refer to Disassembly and AssemblyRENR2808, "Fuel Tank - Install".
Install the hydraulic tank. Refer to Disassembly and AssemblyRENR2808, "Tank (Hydraulic) - Install".
Install the cab. Refer to Disassembly and AssemblyRENR2808, "Cab - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-3145 Load Leveler 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00718508
Illustration 2 g00487660
Attach tooling (A) to the swing post and attach tooling (A) to the underside of the counterweight. Place the upper structure on the undercarriage frame. The weight of the upper structure is approximately 700 kg (1540 lb).
Illustration 3 g00487990
Apply 4C-4032 Bearing Mount Compound to 14 bolts (5). Install 14 bolts (5) and washers. Tighten the bolts to a torque of 83 9 N m (61 6.5 lb ft).
Illustration 4 g00487591
Install the bolt (4) and the washer.
Illustration 5 g00487586
Install the two bolts (3) and the washers.
Illustration 6 g00487523
Install four bolts (2) and washers.
Illustration 7 g00487475
Connect the eight hose assemblies (1) with the swivel.,,, End By:
Install the fuel tank. Refer to Disassembly and AssemblyRENR2808, "Fuel Tank - Install".
Install the hydraulic tank. Refer to Disassembly and AssemblyRENR2808, "Tank (Hydraulic) - Install".
Install the cab. Refer to Disassembly and AssemblyRENR2808, "Cab - Install".
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
206, 212, 3054, 3054B, 3056, 307, 312, 312B L, 312C, 315, 315B L, 317, 416, 416B, 416C, 416D, 420D, 424D, 426, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 554, 908, 91...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 317, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 914G, 924G, 924GZ, 930G, AP-655C, AP...
3054, 3056, 3056E, 312C, 554, 924G, 924GZ, 930G, AP-655C, BB-760, CB-434C, CB-534C, CB-535B, CP-433C, CP-433E, CP-573E, CP-663E, CS-323C, CS-431C, CS-433C, CS-563E, CS-583E, CS-663E, CS-683E, IT28G, M...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 442D, 554, 908, 924G, 924GZ, 930G, AP-655C, BB-760, BG-225C, CB-434C, CB-534C, CB-535B, CP-4...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315C, 316E L, 318D2 L, 318E L, 320D2, 320D2 GC, 320D2 L, 323D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 4...
3056, 3056E, 924G, 924GZ, 930G, BB-760, CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, IT28G, M316C, M318C, M318C MH, M322C
3054, 3054B, 3056, 924G, 924GZ, CS-663E, CS-683E
1921379
HOUSING
CP-663E, CP-76, CS-663E, CS-683E, CS-74B, CS-76B, CS-78B
CP-663E, CP-76, CS-663E, CS-683E, CS-74B, CS-76B, CS-78B
2292314
HOUSING
CP-44, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-44, CS-54, CS-56, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
CP-44, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-44, CS-54, CS-56, CS-563E, CS-583E, CS-64, CS-663E, CS-683E, CS-74
2308964
HOUSING
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
2308967
HOUSING
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
2308972
HOUSING
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
CP-573E, CP-64, CP-663E, CP-68B, CP-74B, CP-76, CS-56B, CS-64, CS-663E, CS-683E, CS-68B, CS-74, CS-74B, CS-76B, CS-78B
1933864
HOUSING-RH
CS-663E, CS-683E
CS-663E, CS-683E
1933867
HOUSING-LH
CS-663E, CS-683E
CS-663E, CS-683E
1584656
HOUSING
CB-214D, CB-214E, CB-22
CB-214D, CB-214E, CB-22
1924558
HOUSING-BEARING
AP-900B
AP-900B
1962588
HOUSING AS
AS2301
AS2301
2013674
HOUSING
AS2251, AS2301
AS2251, AS2301
2712067
HOUSING
CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-64, CD-54
CB-44B, CB-534D, CB-54, CB-54B, CB-564D, CB-64, CD-54
2712066
HOUSING
CB-44B, CB-534D, CB-54, CB-54B, CD-54, CD-54B
CB-44B, CB-534D, CB-54, CB-54B, CD-54, CD-54B
2712065
HOUSING
CB-44B, CB-534D, CB-54, CB-54B, CD-54, CD-54B
CB-44B, CB-534D, CB-54, CB-54B, CD-54, CD-54B
2158009
HOUSING
CB-434D, CB-534D, CB-634D
CB-434D, CB-534D, CB-634D
1873439
HOUSING AS
PF-300C, PS-300B
PF-300C, PS-300B
1921379
HOUSING
CP-663E, CP-76, CS-663E, CS-683E, CS-74B, CS-76B, CS-78B
CP-663E, CP-76, CS-663E, CS-683E, CS-74B, CS-76B, CS-78B