HOUSING AS-PUMP 1754019 - Caterpillar

Table 1
Part Number Tool Description
TEST EQUIPMENT
4C-9910 Portable Hydraulic Tester The flow meter must read 303 L/min (80 US gpm).
225-8266 Ammeter Tool Gp Clamp-on Ammeter, 0 to 500 Amp range, AC, and DC
155-5175 AC Current Probe Clamp-on Ammeter, AC current probe, 0 to 1000 Amp with 146-4080 multimeter
146-4080 Digital Multimeter Gp Digital Multimeter, for measuring voltage, current, and resistance
4C-6500 Digital Thermometer For measuring temperature in degrees Celsius
243-3134 5 kV Insulation Tester For measuring insulation resistance
1H-3110 Bearing Puller Gp For changing the bearings and exciter armature
1H-3107 Push-Puller Tool Gp For changing the bearings and exciter armature
151-6320 Wire Removal Tool For removal of individual pins from electrical connectors
1U-6602 Photo-Tachometer For measuring generator speed
9U-7400 Multitach Tool Gp Multi Tachometer, For measuring generator speed
1U-6605 Reflective Tape Retro reflective tape for measuring generator speed
7X-1710 Multimeter Probe Electrical probe for circuit testing
275-5120 Communication Adapter Gp Communication Adapter for use with Cat ET computer
327-0375 Adapter Kit USB Serial Adapter and associated Cat ET software
SPECIAL TOOLS
N/A Resistive Bridge For measuring resistance of windings
N/A Protective Gloves Electrical, rubber, 13,800 V
STANDARD TOOLS
6V-3001 Crimping Tool For crimping Sure Seal connectors
8S-1075 Crimping Tool Heavy duty crimping and stripping
1U-5804 Crimp Tool For crimping Deutsch connectors
1U-7322 Flashlight As required
8F-9866 Grease Gun For lubricating bearings
1S-0258 Plastic Hammer As Soft-faced
4C-6477 Lamp, fluorescent Safety light
1U-7230 Hand Tool Gp Screwdrivers, Both Phillips and standard (sized as required)
1U-7248 Wrench Adjustable, 12 inch
8T-9293 Torque Wrench Torque, 40 to 250 ft-lb, 1/2 inch drive
1U-7460 Wrench set Allen, 1/8 to 1/2 inch
1U-7160 Socket set Nine-piece, 3/8 to 7/8 inch with 3/8 inch drive
1U-8030 Socket set Twelve-piece, 7/16 to 1 1/8 inch with 1/2 inch drive
1U-7830 Socket set Twelve-piece, 8 to 19 mm with 3/8 inch drive
1U-7880 Socket set Ten-piece, 16 to 26 mm with 1/2 inch drive
1U-7050 Wrench set Thirteen-piece, open-end combination sized 1/4 to 1 inch (standard)
N/A Vacuum Electric with nonmetallic nozzle
MATERIALS
1U-8809 Rust Preventative Corrosion inhibitor
1U-8803 Detergent As required for cleaning, Hydrosolv 67
4C-5522 Gloves For chemical protection
N/A Plastic Protection for long-term storage
N/A Rags As required
N/A Water For cleaning
N/A Air Compressed, dry
N/A Covering material Waterproof desiccant bags, for protection from moisture during long-term equipment storage
SEHS7332 "DO NOT OPERATE" Tags For providing visual warnings and cautions