1806647 HOUSING AS Caterpillar parts
24H, 3408E, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 988B, 988F II, 990, 990 II, 992C, C30, C32, D10N...
Rating:
Alternative (cross code) number:
CA1806647
180-6647
1806647
CA1806647
180-6647
1806647
Weight: 9 pounds 4 kg.
COLD PLANER, WHEEL TRACTOR,
Compatible equipment models: 1806647:
Number on catalog scheme:
4
For full view, you need register
Cat SIS web machinery list:
Information:
Hitch Stays In Automatic Mode With Switch In MAN Position
By remaining in the automatic mode, it means that the hitch continues to move as if it is still in the automatic mode.If the hitch stops moving when switched to MAN position, the control has recognized the switch transition.Be sure it is properly entering the manual mode. See, Modes Of Operation.If it is still not operating in Automatic Mode (not moving), but does not enter manual mode, see, Hitch Control Lever Sensor & Hitch Position Sensor Calibration.Check Hitch Mode Switch Input at Control* With the key start switch in the OFF position, remove the machine harness connector from the hitch control.* Place the hitch mode switch in the MAN position. Measure continuity between the control connector contact 5 (hitch mode switch) and contact 2 (ground). There should be continuity.* If there is no continuity, the switch or harness is defective. Check the switch and repair or replace the harness.* If there is continuity, the harness and the switch are good. Check contact 5 for dirt or corrosion and recheck for the problem with the control connected.* If the problem is still present, replace the hitch control. See, Hitch Control Replacement.Control Will Not Enter Automatic Mode
1. Check For Mode Change* Place the hitch control in manual mode. See, Modes of Operation.* Observe mode indicator and switch the hitch mode switch to the AUT position. Check
By remaining in the automatic mode, it means that the hitch continues to move as if it is still in the automatic mode.If the hitch stops moving when switched to MAN position, the control has recognized the switch transition.Be sure it is properly entering the manual mode. See, Modes Of Operation.If it is still not operating in Automatic Mode (not moving), but does not enter manual mode, see, Hitch Control Lever Sensor & Hitch Position Sensor Calibration.Check Hitch Mode Switch Input at Control* With the key start switch in the OFF position, remove the machine harness connector from the hitch control.* Place the hitch mode switch in the MAN position. Measure continuity between the control connector contact 5 (hitch mode switch) and contact 2 (ground). There should be continuity.* If there is no continuity, the switch or harness is defective. Check the switch and repair or replace the harness.* If there is continuity, the harness and the switch are good. Check contact 5 for dirt or corrosion and recheck for the problem with the control connected.* If the problem is still present, replace the hitch control. See, Hitch Control Replacement.Control Will Not Enter Automatic Mode
1. Check For Mode Change* Place the hitch control in manual mode. See, Modes of Operation.* Observe mode indicator and switch the hitch mode switch to the AUT position. Check
Parts housing Caterpillar catalog:
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633E II, 637D, 637E, 637G, 657B, 657E, 657G, ...
631E, 657E, 657G, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772G, 772G OEM
631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, AD55B, AD60
621E, 621F, 623E, 631E, 637E, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777, 777B, 777D, 785, 793C, AD40, AD45, AE40, AE40 II, D250E, D250E II, D300E, D300E II, D400...
639D, 988B
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 986H, 988B, 988F, 988F II, 988G,...
980F, 980G, 980G II, D10N, D9R, D9T
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980G, 986H, 988F II, 988G, 988H, 988K
769C, 773B, 824C, 826C, 834B, 980C, 988B, 992C, AD45B, AD55, AD55B, AD60, D44B, D550B, PM-565, PM-565B
3408, 988B
980C, 980F, 980F II, 988, 988B
D8L, D9N, D9R
1620160
HOUSING AS
24H, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 775B, 775D, 775E, 844, 990, 990 II, 992C, C30, C32, D10N, D10R, D9L
24H, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 775B, 775D, 775E, 844, 990, 990 II, 992C, C30, C32, D10N, D10R, D9L
1620158
HOUSING AS
24H, 3408E, 3412E, 5110B, 631E, 633E II, 637E, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 775D, 834B, 836, 844, 988F II, 990 II, 992C, AD40, AE40, D10R, D9R, PM-565B
24H, 3408E, 3412E, 5110B, 631E, 633E II, 637E, 651E, 657E, 69D, 769C, 769D, 771D, 773B, 773D, 775D, 834B, 836, 844, 988F II, 990 II, 992C, AD40, AE40, D10R, D9R, PM-565B
1554929
HOUSING AS-TURBINE
3412E, C18
3412E, C18
3412E, C18
2487685
HOUSING
3412E, C30, C32
3412E, C30, C32
2506876
HOUSING
3412E
3412E
3134432
HOUSING AS-PUMP
3512, 3512C, 3516, 3516B, 3516C, 793B, 793C, XQC1600
3512, 3512C, 3516, 3516B, 3516C, 793B, 793C, XQC1600
2229921
HOUSING-FLYWHEEL
3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
225, 231D, 3208, 613C, PR-1000
1371345
HOUSING AS-PUMP
3408, 3412, 3412E, G3408, G3412
3408, 3412, 3412E, G3408, G3412
2547220
HOUSING GP-PUMP
24H, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775E, 834B, 844, 988B, 988F II, 990, 990 II, 992C, C30, C32, D10N, D10R, D8L, D9L, D9N, ...
24H, 3412E, 5110B, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 769C, 769D, 771D, 773B, 773D, 773E, 775B, 775E, 834B, 844, 988B, 988F II, 990, 990 II, 992C, C30, C32, D10N, D10R, D8L, D9L, D9N, ...