HOUSING 1T1427 - Caterpillar

Illustration 1 g03818423
Right side view
Table 1
Specification for 242-6463 Hoe Stick Gp and 324-0966 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.    
1     1     4I-4811 Pin As     Diameter is
69.850 0.025 mm (2.7500 0.0010 inch).    
2     1     4I-4809 Pin As     Diameter is
79.850 0.025 mm (3.1437 0.0010 inch).    
3     2     166-1495 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
4     2     235-7679 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
5     2     166-1494 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
6     Install the bushing in the bore so that the part number of the bushing is facing outward.
Bushing (6) is one of the following part numbers:    
2 228-5615 Bushing     Bore before installation is
90.21 0.04 mm (3.552 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
2 244-4277 Bushing     Bore before assembly is
90.16 0.02 mm (3.550 0.001 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
7     2     229-1096 Bushing     Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore before assembly is
70.17 0.04 mm (2.763 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
8     2     240-2913 Bushing     Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore before assembly is
80.20 0.04 mm (3.157 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).