HOUSING-WATER REGULATOR 2192334 - Caterpillar

Dump Body Machines
Note: The machines hoist control lever functions will be disabled when the parking brake is engaged and the engine speed is less than 1500 rpm.
The body must be lowered and in the FLOAT position when operating the machine. This will help prevent damage to the body, caused by vibrations from the haul road.
Illustration 1 g06099596
LOWER Position (1) - Hold the hoist control lever forward to lower the dump body. When the hoist control lever is released, the hoist control lever will return to the FLOAT position.
FLOAT Position (2) - When the hoist control lever is in the FLOAT position, the dump body will seek a level. The hoist control lever will stay in this position until the hoist control lever is manually moved.
HOLD Position (3) - When the hoist control lever is in the HOLD position, the dump body will not move. The hoist control lever will stay in this position until the hoist control lever is manually moved.
RAISE Position (4) - Hold the hoist control lever backward to raise the dump body and empty the load. When the hoist control lever is released, the hoist control lever will return to the HOLD position.
Do not use the hoist control when the body retaining pins are installed. Damage to the dump body may occur.
Ejector Body Machines
Note: The machines hoist control lever functions will be disabled when the parking brake is engaged and the engine speed is less than 1500 rpm.
Illustration 2 g06226931
RETRACT Position (1) - Hold the hoist control lever forward to retract the ejector plate. When the hoist control lever is released, the hoist control lever will return to the first hold position.
first Hold Position (2) - When the hoist control lever is in the first hold position, the ejector plate will not move. The hoist control lever will stay in this position until the hoist control lever is manually moved. The truck can be driven normally.
second HOLD Position (3) - When the hoist control lever is in the second HOLD position, the ejector plate will not move. The hoist control lever will stay in this position until the hoist control lever is manually moved. the truck is limited to traveling at 3 km/h (1.86 mph).
EJECT Position (4) - Hold the hoist control lever backward to eject the ejector plate and empty the load. When the hoist control lever is released, the hoist control lever will return to the second HOLD position.
Do not use the hoist control when the tailgate retaining pin is installed. Damage to the ejector body may occur.