HOUSING AS 2290865 - Caterpillar

1. Remove bolt and retainer (1) that hold the brake drum to the brake shaft. Remove brake drum (2). 2. Remove the cotter pin and pin (3). Disconnect the cable from the brake lever. Remove four bolts (6) that hold plate (5) to bhe bearing cage. Remove the plate and the brake lining. Remove lever (4). 3. Remove three springs (7) that hold the brake linins to the plate. Remove the brake linings.Install Swing Brake
1. Put the brake linings in position on the plate. Install the three springs that hold the brake linings to the plate. 2. Install lever (1). 3. Put plate (3) and brake lining (2) in position on the bearing cage. Install the four bolts that hold the plate to the bearing cage. 4. Install brake drum (4) on the brake shaft. The spline on the brake shaft and the brake drum must be clean and dry at assembly. 5. Connect brake linkage (7).6. Install retainer (5) and bolt (6). Tighten the bolt to a torque of 200 20 lb.ft. (270 25 N m).