HOUSING-BRAKE 2312248 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     2P-8250     Strap Wrench Assembly     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00572325
Typical exampleNote: If only the oil filters (5) need to be removed, use Tool (A) to remove the filters from engine oil filter base (3) .
Remove three bolts (4) from the oil supply and the oil return lines.
Disconnect two hose assemblies (2) from engine oil filter base (3) .
Remove five bolts (1) that hold engine oil filter base (3) to the engine.
Remove engine oil filter base (3), oil filters (5) and the gasket.