HOUSING-CLUTCH 2375747 - Caterpillar

Illustration 3 g01444662
Hydraulic oil cooler location (3) Hydraulic oil coolerThe hydraulic oil cooler (3) is mounted in front of the radiator at the front of the engine compartment. Access to the oil cooler is gained by opening the hood and removing the side covers.
Illustration 4 g01444663
The joystick for the mechanical operated loader control (22) Control lever for the loader bucket (23) Switch for the transmission neutralizer (24) Auxiliary control The operator must face forward and the seat must face forward while you move the machine. When you operate the loader control, the operator and the seat must face forward. The loader controls are located on the right side of the operator station. The control lever for the loader bucket (22) controls the following positions of the bucket.The control lever for the loader bucket (22) controls FLOAT, LOWER, RAISE, RETURN-TO-DIG, TILT BACK, and DUMP positions of the bucket.This lever also has a switch (23) in order to neutralize the transmission.If the machine is equipped with an auxiliary valve, the auxiliary control lever (24) controls that circuit.
Illustration 5 g01437535
The location of the joysticks for the pilot operated backhoe (25) Control for the boom and swing (26) Control for the stick and bucket
Illustration 6 g01444665
The location of the joysticks for the pilot operated backhoe (26) Control for the stick and bucket (27) Control for the extendable stick
Illustration 7 g01444668
The location of the joysticks for the pilot operated backhoe (25) Control for the boom and swing (28) Control for the auxiliary control (if equipped)The operator must rotate the seat in order to operate the backhoe. The operator faces the rear of the machine with the levers for the backhoe in sight.Note: The left side of the machine and the right side of the machine are established by the view when you are operating the controls.With the standard hydraulic excavator control pattern, the control for the stick and swing (25) controls the STICK IN, STICK OUT, SWING LEFT and SWING RIGHT. The control for the boom and bucket (26) controls the BOOM RAISE, BOOM LOWER, BUCKET LOAD, and BUCKET DUMP.With the backhoe control pattern, the control for the boom (25) controls the BOOM RAISE, BOOM LOWER, SWING LEFT and SWING RIGHT. The control for the stick (26) controls the STICK IN, STICK OUT, BUCKET LOAD, and BUCKET DUMP.The extendable stick control (27) controls the STICK EXTEND. The extendable stick control (27) controls the STICK RETRACT. The auxiliary control (28) controls the pressurized lines of an attachment.
Illustration 8 g01230671
The machine is equipped with a joystick pattern switch. The machine control pattern can be varied by moving the switch. Position "1" of the joystick control selector allows the functionality of the joystick to be in the excavator style control. The alternate position "2" allows the operator to change the functionality of the joystick to the backhoe style control.Machines with mechanically actuated backhoe controls may be equipped with the Dynahoe pattern or the Ford pattern.Note: The instructions for the backhoe controls are viewed from the operator seat. You