HOUSING-PINION 2718517 - Caterpillar

(1) Tighten sixteen bolts to a torque of ... 270 40 N m (200 30 lb ft)(621B & 623B Tractors)
(1) Install supports to flywheel housing by putting three of the four mounting bolts next to the rear face of the flywheel housing. Tighten bolts to standard torque.(2) Tighten the four cap bolts to a torque of ... 254 14 N m (185 10 lb ft)(3) Tighten bolts to a torque of ... 470 45 N m (350 35 lb ft)(16G Motor Grader)
Install the correct number of shims (2) between rear support assemblies and flywheel housing (1) so dimension (X) between rear support assemblies and frame (5) is ... 4.8 3.0 mm (.19 .12 in)(3) After assembly of engine and transmission into the vehicle, adjust bolts so dimension (Y) between bolt and frame (5) is ... 7.9 3.0 mm (.31 .12 in)(4) After bolt adjustment, tighten locknut to ... 205 25 N m (150 20 lb ft)(245B Excavator)
(1) Tighten bolts to a torque of ... 135 20 N m (100 15 lb ft)