HOUSING 2941736 - Caterpillar

"Connect Machine"
The "Connect Machine" option of the "File" menu allows the user to establish communications with a machine.
Illustration 7 g00642327
Select the "Connect Machine" option from the "File" menu. The "Trying to Connect" message is displayed at the bottom of the "Application" window. After the VIMSpc software establishes communication with the machine, the baud rate of connection is displayed on the status bar. The connection icon that is located on the status bar will indicate the connection. The arrows have become green."Disconnect Machine"
The "Disconnect Machine" option of the "File" menu allows the user to abort communications with a machine.
Illustration 8 g00642980
Select the "Disconnect Machine" option from the "File" menu. The following occurs after the VIMSpc software aborts communications with the machine:
The connection icon located on the status bar indicates the connection has been disconnected
The arrows become redInstall Source Software and Configuration Software
Installing source software and configuration software is a common service procedure for machines that are equipped with VIMSTM. This process is accomplished by using the WinFlash program and the appropriate onboard software. WinFlash is a program that is included with the Electronic Technician Software. Contact the machine product support group for a list of flash software.Electronic Control Module (ECM) (Flash Program)
The following procedure is used to FLASH software into the VIMS ECM.
Procedure
Connect the data-link Cable between the Communication Adapter and the Cat Electronic Technician (Cat ET).
Connect the data-link cable between the communication adapter and the machine diagnostic connector.
Turn on the disconnect switch and the keyswitch.
Use WinFlash to load the software.VIMSTM Onboard Software Update Worksheet
This worksheet should be completed prior to flashing any new VIMS onboard software. This worksheet will help prevent the loss of stored on board data and help prevent the loss of "user settings" in the configuration.Note: The service program codes (SPC) can be used to access the information that is required to complete this worksheet. See System Operation, "Electronic Control Module" section of this manual.
Illustration 9 g01052974
Illustration 10 g01052978
Note: Before the new VIMS onboard software is flashed, verify that a copy of the current VIMS onboard software is available.Note: A print of the VIMSpc Machine Status Display screen may be used in place of item (4) . This print can be used to reference important information about the setup of the machine. Perform the following procedure to make a file that will save the print. Procedure to make a print of the screen
Connect VIMSpc to the machine
Establish communication.
Access the "Machine Status Display" screen.
Press the Print Screen key to place the print on the clipboard.
Open the Windows Paintbrush, the Clipboard Viewer, the Microsoft Word or WordPad program on the PC.
Use the "paste option" in the "Edit Menu" or press "Ctrl-V" to place the image on the "desktop".
Save the file by:
Open the "File Menu".
Select the "Save As" option.
Enter a name for the file in