HOUSING 2F1073 - Caterpillar

Illustration 1 g00673753
Location of 161-5195 Control (IQAN-DG)The IQAN-DG module consists of a display and nine keys. This module is located on the right panel in the center of the cab. The IQAN-DG allows individual functions of the machine to be displayed and adjusted. The IQAN-DG monitors all of the input signals and all of the output signals. The IQAN-DG allows the operator to obtain different machine information. The monitor is also used for adjusting the implement hydraulic settings, calibration, testing and troubleshooting.Note: Most of the troubleshooting of the IQAN system and machine system can be performed with the use of the IQAN-DG module.The IQAN-DG allows you to measure electrical input signals and the electrical output signals of the IQAN on the machine.Reference: Systems Operation, "Application (IQAN-DG)".
Illustration 2 g00673736
Location of 161-5197 Control (IQAN-XS)The IQAN-XS module changes the analog signals of the operating devices into CAN-BUS digital signals. Then, the CAN-BUS signals are sent to the IQAN-MG module. The IQAN-XS module receives CAN-BUS signals and changes the signals to digital (on/off) signals (indication lights of the boom and steering activation). The IQAN-XS module is located behind the operator seat in the cab.Reference: Systems Operation, "Application (IQAN-XS)".
Illustration 3 g00872702
(1) 161-5194 Control (IQAN-MG). (2) 161-5196 Control (IQAN-XP). (3) IQANtalk connection.IQAN-MG module (1) and IQAN-XP module (2) are located behind the rear access panel in the cab.The IQAN-MG module (1) processes all of the incoming signals. Then, the module converts the signals into functions and sends the CAN-BUS signals to the other control units.Reference: Systems Operation, "Application (IQAN-MG)".The IQAN-XP module (2) changes the CAN-BUS digital signals of the IQAN system into analog signals and sends the signals to the corresponding components of the implement hydraulics. The IQAN-XP module (2) changes the CAN-BUS digital signals of the IQAN system into digital signals and sends the signals to the corresponding solenoids. The IQAN-XP module (2) receives analog signals and changes the signals to CAN-BUS digital signals in the IQAN system.For service and maintenance, a connection for IQANtalk is used. The IQANtalk connection (3) is a nine pin connector that is located behind the rear access panel in the cab. A computer with IQANtalk software can be used to communicate externally with the IQAN system.IQANtalk is software that provides the user with additional tools for advanced troubleshooting, monitoring, updating and flashing the IQAN system.The IQANtalk software allows you to download the machine settings that are specific to the machine. The IQANtalk also allows you to flash new software to the IQAN. This software contains the parameters of the machine systems. The IQANtalk software allows you to download files that can be saved onto your PC. These files can be sent to other users with IQANtalk software for analysis and evaluation. The IQANtalk software also allows you to download settings from the IQAN for troubleshooting. IQANtalk allows you to monitor multiple functions simultaneously.