HOUSING AS-DRIVE 2G9844 - Caterpillar

Illustration 14 g03586883
Install bearing (26), plate (25), and pistons (24).
Illustration 15 g03586880
Install barrel assembly (23) and shim (22).
Illustration 16 g03586865
Install bearing cone (21).
Illustration 17 g03586863
Install plug (19), plugs (20), and the O-ring seals.
Illustration 18 g03586853
Illustration 19 g03586845
Install piston (16), spring (17), and retainer (18) into the pump housing.
Illustration 20 g03586840
Install rings (14) and O-ring seal (15) onto adapter (13).
Illustration 21 g03586811
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install adapter (13) into the pump housing.
Install cartridge (12) onto adapter (13). Tighten cartridge (12) to a torque of 19 N m (168 lb in).
Illustration 22 g03586808
Illustration 23 g03586806
Install solenoid (11), O-ring seal (10), and nut (9).
Illustration 24 g03587953
Install port plate (7) and O-ring seal (6) onto head (5).
Illustration 25 g03586800
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install head (5) and bolts (4). Tighten bolts (4) to a torque of 130 13 N m (96 9 lb ft).
Illustration 26 g03586798
Install gasket (3) onto valve (1).
Illustration 27 g03586796
Install valve (1) and bolts (2). Tighten bolts (2) to a torque of 15.5 1.5 N m (137 13 lb in). End By:
Install the piston pump (steering).