HOUSING GP-FLYWHEEL 2P6166 - Caterpillar

air inlet and the exhaust system includes the following components:
Turbocharger (3)
Air cleaner (4)
Exhaust manifold (5)
Exhaust valves (6)
Inlet valves (7)
Aftercooler (10)
Cylinder head (11)
Valve system components
Illustration 1 g01122516
Air flow through the engine
(1) Exhaust outlet
(2) Air inlet
(3) Turbocharger
(4) Air cleaner
(5) Exhaust manifold
(6) Exhaust valves
(7) Inlet valves
(8) Sea water inlet to aftercooler
(9) Sea water outlet from aftercooler
(10) Aftercooler
(11) Cylinder head Clean inlet air from the air cleaner (4) is pulled through the air inlet of the turbocharger (3) by the turning of the compressor wheel. The compressor wheel causes a compression of the air. The turbocharger compresses the inlet air so that a larger volume of air can be drawn into the cylinders. This compressing of the inlet air is referred to as boost. The compression of the inlet air causes the temperature of the air to increase. The air then flows to the aftercooler (10). The aftercooler utilized cool sea water in order to cool the inlet air. Cooling of the inlet air causes the air to become more dense. This increases the combustion efficiency and the horsepower output of the engine. The air then flows from the aftercooler to the inlet manifold of the engine. When the inlet valves (7) open, the air flows into the engine cylinders. The air is mixed with the fuel for combustion. When the exhaust valves (6) open, the exhaust gases go out of the engine cylinders and into exhaust manifold (5). From the exhaust manifold, the exhaust gases flow through the blades of the turbine wheel in the turbocharger (3). This causes the turbine wheel to spin. The exhaust gases then flow out of exhaust outlet (1) of the turbocharger.Turbocharger
Two turbochargers are mounted on the rear of the engine. All of the exhaust gases from the left exhaust manifold goes through the left turbocharger, and the right turbocharger uses the exhaust from the right exhaust manifold.
Illustration 2 g01385582
Turbocharger
(12) Air inlet
(13) Compressor housing
(14) Compressor wheel
(15) Bearing
(16) Oil Inlet port
(17) Bearing
(18) Turbine housing
(19) Turbine wheel
(20) Exhaust outlet
(21) Oil outlet port
(22) Exhaust inlet All of the air that enters the engine passes through the turbocharger. All of the exhaust gases from the engine pass through the turbocharger.The exhaust gases enter turbine housing (18) through exhaust inlet (22). The exhaust gas pushes on the blades of the turbine wheel (19). The turbine wheel is connected by a shaft to the compressor wheel (14).Air that passes through the air filters enters the compressor housing air inlet (12) by the rotation of compressor wheel (14). The compressor wheel causes the inlet air to be pushed into the inlet side of the engine. Boost pressure is caused when the compressor wheel pushes more air into the inlet side of the engine. This results in an inlet manifold pressure that exceeds atmospheric pressure. This allows the engine to burn more fuel. When the engine burns more fuel the engine produces more power.When the throttle is opened, more fuel is injected into the cylinders. The combustion of this additional fuel produces greater exhaust temperature. The