3460495 HOUSING GP-FRONT Caterpillar parts
320D2, 320D2 GC, 320D2 L
Rating:
Alternative (cross code) number:
CA3460495
346-0495
3460495
CA3460495
346-0495
3460495
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
Accurate Payload Information
Do not load the machine on a surface that has a slope of more than 5%.
The information may not be accurate if the suspension cylinders are not properly charged.
Do not allow the operator of the loader to press with the loader bucket on top of the last load.
Do not move the truck more than 160 m (525 ft) while the truck is being loaded.
Do not move the hoist control while the truck is being loaded.
Calibrate the TPMS after components are replaced. Calibrate the TPMS after substantial changes are made to the empty weight of the truck. There is a substantial change in weight when wear plates are added to the body.
The information will not be accurate if the truck is loaded with a conveyor. If the truck is loaded with a continuous feed system, the information will not be accurate. These systems do not provide an abrupt increase in the pressure of the suspension cylinders. The abrupt increase of the pressure of the suspension cylinders causes the TPMS to begin the loading cycle.
Do not move away from the loading site before the pressures of the suspension cylinders have stabilized. Do not move away from the loading site before the message center displays the final weight.
Do not ignore fault codes.Hauling
Pay attention to your surroundings. Keep a safe distance from any machines in front of your machine.Do not drive over unprotected power cables. Do not drive under low power cables.Know the maximum height of the machine. Know the maximum width of the machine. Maintain proper clearances.When you are on a downgrade, the repeated, intermittent application of the service brake control or of the manual retarder lever can reduce the air pressure. This can cause the air pressure to drop below the operating pressure.Note: The manual retarder lever should not be used to park the machine.
Illustration 4 g00615954When you approach a downgrade that is long or steep, switch (1) for the automatic retarder control (ARC) should be in the ON position. When you drive down a grade, use the same gear range that is used for driving up a grade when the machine is loaded. The transmission direction and speed control lever should be in the desired gear before you start the downgrade. The actual gear of the transmission should also match the selected gear before you start the downgrade.
Illustration 5 g00616387If the machine builds up excessive
Do not load the machine on a surface that has a slope of more than 5%.
The information may not be accurate if the suspension cylinders are not properly charged.
Do not allow the operator of the loader to press with the loader bucket on top of the last load.
Do not move the truck more than 160 m (525 ft) while the truck is being loaded.
Do not move the hoist control while the truck is being loaded.
Calibrate the TPMS after components are replaced. Calibrate the TPMS after substantial changes are made to the empty weight of the truck. There is a substantial change in weight when wear plates are added to the body.
The information will not be accurate if the truck is loaded with a conveyor. If the truck is loaded with a continuous feed system, the information will not be accurate. These systems do not provide an abrupt increase in the pressure of the suspension cylinders. The abrupt increase of the pressure of the suspension cylinders causes the TPMS to begin the loading cycle.
Do not move away from the loading site before the pressures of the suspension cylinders have stabilized. Do not move away from the loading site before the message center displays the final weight.
Do not ignore fault codes.Hauling
Pay attention to your surroundings. Keep a safe distance from any machines in front of your machine.Do not drive over unprotected power cables. Do not drive under low power cables.Know the maximum height of the machine. Know the maximum width of the machine. Maintain proper clearances.When you are on a downgrade, the repeated, intermittent application of the service brake control or of the manual retarder lever can reduce the air pressure. This can cause the air pressure to drop below the operating pressure.Note: The manual retarder lever should not be used to park the machine.
Illustration 4 g00615954When you approach a downgrade that is long or steep, switch (1) for the automatic retarder control (ARC) should be in the ON position. When you drive down a grade, use the same gear range that is used for driving up a grade when the machine is loaded. The transmission direction and speed control lever should be in the desired gear before you start the downgrade. The actual gear of the transmission should also match the selected gear before you start the downgrade.
Illustration 5 g00616387If the machine builds up excessive
Caterpillar SIS machinery equipment:
Caterpillar SIS
320D2 Excavator XBA00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
XQP150 Generator Set PJE00001-UP POWERED BY C7.1 »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators YBK00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 Excavator WBY00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators TGJ00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators ESG00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 L Excavator XCC00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
527 Track Skidder J6800001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
323D3 Excavator FEY00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
C7.1 Industrial Engine 63000001-UP »
346-0495
HOUSING GP-FRONT
320D2 Excavator DFM00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators KHR00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators LMA00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators DNP00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators GBA00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators YEA00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 GC Excavator JFM00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 Excavator XBB00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
C7.1 DE200E0/DE220E0/DE150E0 Generator Set GTP00001-UP »
346-0495
HOUSING GP-FRONT
C7.1 DE200E0/DE220E0 Generator Set ECW00001-UP »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators TDN00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators KBS00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators LCA00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 Excavator MDJ00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators NBF00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators RDZ00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavator DNS00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
320D2 & 320D2 L Excavators ZBD00001-UP (MACHINE) POWERED BY C7.1 Engine »
346-0495
HOUSING GP-FRONT
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315C, 316E L, 318D2 L, 318E L, 320D2, 320D2 GC, 320D2 L, 323D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 4...
307B, 307C, 308C, 311B, 311C, 314C, 315B, 315B FM L, 320B, 320B FM LL, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 321B, 322B L, 322C, 323D L, 323D ...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E ...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
1588159
HOUSING
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322C, 322...
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322C, 322...
1588206
HOUSING
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 3...
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 3...
1343296
HOUSING-PLUG
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315B, 315B FM L, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315B, 315B FM L, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D...
318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 L, 323E ...
3717141
HOUSING AS
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
3717142
HOUSING AS
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
2254548
HOUSING
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
1733507
HOUSING AS
2384C, 2484C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
2384C, 2484C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
3691544
HOUSING GP-HAMMER
H75E S
H75E S
3690789
HOUSING GP-HAMMER
H75E S
H75E S
3712538
HOUSING GP-FLYWHEEL
323D2 L
323D2 L
3754645
HOUSING GP-FRONT
525D, C7.1
525D, C7.1
3866759
HOUSING GP-FIXED AXLE
545D, 555D
545D, 555D
3871995
HOUSING GP-FRONT
R1600H
R1600H