HOUSING AS 3S7099 - Caterpillar

Illustration 2 g01769014
Detail AManifold
Illustration 3 g01769016
Detail BManifold (12) Torque for three plug assemblies ... 18 2 N m (159 18 lb in)
Illustration 4 g01767361
View C-C (13) Apply a continuous bead of 4C-9612 Silicone Sealant to the T-shaped joints immediately prior to the installation of the gasket for the oil pan (14) . The application of the sealant should cover the entire width of the T-shaped joints. (16) Apply 4C-9612 Silicone Sealant immediately prior to assembling the torque converter housing (15) . After assembly of the torque converter housing, remove excess sealant from the flange with a straight edge. Apply the sealant again.
Illustration 5 g01948654
View D-D
Illustration 6 g01948655
(17) Torque for seven plug assemblies ... 36.75 1.75 N m (27.11 1.29 lb ft) (18) Torque for three plug assemblies ... 8.5 0.5 N m (75.2 4.4 lb in) (19) Torque for two bolts ... 100 20 N m (74 15 lb ft) (20) Torque for seven orifice plugs ... 15 2 N m (133 18 lb in) (21) 277-0361 Spring Length under test force ... 36.5 mm (1.44 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 39.5 mm (1.56 inch) Outside diameter ... 13.36 0.25 mm (0.526 0.010 inch)
Illustration 7 g01948658
(22) 277-0362 Spring Length under test force ... 68.20 mm (2.685 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 72 mm (2.8 inch) Outside diameter ... 14.12 0.25 mm (0.556 0.010 inch) (23) 277-0385 Spring Length under test force ... 26 mm (1.0 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 29.9 mm (1.18 inch) Outside diameter ... 13.17 0.25 mm (0.519 0.010 inch) (24) 277-0386 Spring Length under test force ... 74.30 mm (2.925 inch) Test force ... 279.98 28.00 N (62.9 6.3 lb) Free length after test ... 80 mm (3.1 inch) Outside diameter ... 14.50 0.25 mm (0.571 0.010 inch)