HOUSING & REGULATOR GP 4247894 - Caterpillar

by the ECM. Idle Cylinder Cutout Enable Status
Idle Cylinder Cutout Enable Status is a Parameter will enable multiple cylinders to be cut out on a rotating basis under low load with low engine temperatures in order to bring up the exhaust temperature.Generator Output Power Primary Input Type Configuration
The Generator Output Power Primary Input Type Configuration allows the customer to select between PWM, CAN, and 0 Vdc to 5 Vdc for load feedback.Generator Output Power Primary Input Minimum Data Range
The Generator Output Power Primary Input Minimum Data Range sets the minimum kW that is equal to 0 Vdc for load feedback.Generator Output Power Primary Input Maximum Data Range
The Generator Output Power Primary Input Maximum Data Range sets the maximum kW that is equal to 5 Vdc for load feedback.Generator Output Power Secondary Input Type Configuration
The Generator Output Power Secondary Input Type Configuration allows the customer to select between PWM, CAN, and 0 Vdc to 5 Vdc for load feedback.Engine Driven Accessory Load Configuration
The Engine Driven Accessory Load Configuration parameter allows the customer to account for added parasitic load that will effect the accuracy of the load feedback signal. This will need to be configured to an actual value in order for Gas Substitution to work.Generator Efficiency Configuration
The Generator Efficiency Configuration parameter allows the customer to account for generator efficiency in the load feedback signal. This will need to be configured to an actual value in order for Gas Substitution to work.Parameter Table
Table 2
Description    Value    TT    
ECM Identification Parameters    
Equipment ID     00000000000000000
17 alphanumeric numbers     0    
Engine Serial Number     00000000
8 alphanumeric numbers        
ECM Serial Number     Hardware Dependent        
Software Group Part Number     Software Dependent        
Software Group Release Date     Software Dependent        
Software Group Description     Software Dependent        
Selected Engine Rating    
Rating Number     1        
Rated Frequency     60 Hz        
Rated Engine Speed     1800 rpm        
Rated Real Genset Power     1628 kW        
Rated Apparent Genset Power     Unavailable Parameter        
Rating Configuration     Low Emissions        
Engine/Gear Parameters    
Gas Substitution System Installation Status     Not Installed        
Engine Acceleration Rate     500 rpm/s        
Engine State Control Input Configuration     Hardwired Input        
Engine State Control Default Value     Stop        
Cooldown Duration     3 min        
Low Idle Speed     900 rpm        
Engine Speed Droop     3.0 %        
Droop Mode Selection     Isochronous