4416512 HOUSING GP-FRONT Caterpillar parts
C2.2
Rating:
Alternative (cross code) number:
CA4416512
441-6512
4416512
CA4416512
441-6512
4416512
INDUSTRIAL ENGINE,
Compatible equipment models: 4416512:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 1 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02216734
Remove covers (1) and (2).
Illustration 3 g02216775
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 4 g02216774
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal. Pilot Valve (Joystick) (Right Hand)
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 5 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 6 g02217301
Remove covers (1) and (2).
Illustration 7 g02217302
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 8 g02217303
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 1 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02216734
Remove covers (1) and (2).
Illustration 3 g02216775
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 4 g02216774
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal. Pilot Valve (Joystick) (Right Hand)
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 5 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 6 g02217301
Remove covers (1) and (2).
Illustration 7 g02217302
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 8 g02217303
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
3096718
HOUSING GP-FRONT
216B3, C2.2, CB34B, CB34B XW, CC34B
216B3, C2.2, CB34B, CB34B XW, CC34B
3170965
HOUSING GP-FRONT
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, C2.2
226B, 226B3, 232B, 242B, 247B, 247B3, 257B, C2.2
4208944
HOUSING
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024C, C1.5, C2.2, CB-214E, CB-334E
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024C, C1.5, C2.2, CB-214E, CB-334E
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, AP-255E, BB-621C, C1.5, C2.2, CB-22, CB-34, CB34B, CB34B XW, CC34B
2063742
HOUSING
3034, 3054B, 3056, C1.5, C2.2
3034, 3054B, 3056, C1.5, C2.2
3013, 3013C, C1.5, C2.2
2306139
HOUSING
C1.5, C2.2
C1.5, C2.2
1387401
HOUSING-FLYWHEEL
3024, 3024C, 304.5, BB-621C, C2.2, CB-34
3024, 3024C, 304.5, BB-621C, C2.2, CB-34
3111682
HOUSING GP-FRONT
216B, 216B3, C2.2
216B, 216B3, C2.2
2730126
HOUSING GP-FIXED AXLE
525C, 535C
525C, 535C
2427136
HOUSING GP-OSCILLATING AXLE
525C, 535C, 545C
525C, 535C, 545C
3169040
HOUSING GP-FRONT
236B, 246C, 252B, 277C, 287C
236B, 246C, 252B, 277C, 287C