HOUSING-SWIVEL 4903996 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
B 1U-9200 Lever Puller Hoist 1 Start By:
Remove the engine enclosure group. Refer to Disassembly and Assembly, "Engine Enclosure Group - Remove and Install". Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
When servicing or repairing electric power generation equipment:
Make sure the unit is either locked out or tagged DO NOT OPERATE.
Remove all fuses.
Make sure the generator engine is stopped.
Make sure all batteries are disconnected.
Make sure all capacitors are discharged.
Make sure residual voltage in the rotor, stator and the generator is discharged.Failure to do so could result in personal injury or death.
Illustration 1 g01255094
Remove bolts (1) and panel (2).
Illustration 2 g01255109
Remove harness assemblies (3) and cable assemblies (4) from the generator.
Illustration 3 g01255095
Attach Tooling (A) and a suitable lifting device to generator (5). The weight of generator (5) is approximately 170 kg (375 lb).
Illustration 4 g01255120
Attach Tooling (B) to engine (6) in order to support engine (6).
Illustration 5 g01255096
Remove bolts (7) and screen (8).
Illustration 6 g01255129
Release locks (9). Remove bolts (10).
Illustration 7 g01255132
Remove bolts (11).
Illustration 8 g01255125
Disconnect cable assembly (12).
Remove bolts (13). Use the suitable lifting device in order to remove generator (5).