HOUSING 4J4118 - Caterpillar

Joystick
Illustration 1 g00731659
(A) Left joystick (B) Right joystick (1) Rotate Clockwise - Move the slide control upward in order to rotate the work tool clockwise. (2) Rotate Counterclockwise - Move the slide control downward in order to rotate the work tool counterclockwise. (3) Close - Move the slide control upward in order to close the work tool. (4) Open - Move the slide control downward in order to open the work tool.Pedal
With certain attachment combinations, the third pedal can have different functions. Always check for third pedal function before using the third pedal. Improper operation of the third pedal could result in serious injury or death.
The pedal can be located on either side of the travel pedals. The pedal allows the operator to modulate the speed of the work tool.
Illustration 2 g00756810
(1) Close - Push down on the front of the pedal in order to close the work tool. (2) Open - Push down on the rear of the pedal in order to close the work tool.
Illustration 3 g00756813
(3) Lock pin (A) LOCKED position (B) UNLOCKED positionWhen you are not using the work tool, put the lock pin (3) in LOCKED position (A). This will lock the pedal in order to prevent any unexpected operation of the work tool.
Illustration 4 g00756811
(3) Lock pin (4) Pin (5) NotchNote: To prevent lock pin (3) from being accidentally pulled out, insert pin (4) through notch (5) and turn lock pin (3) by 1/4 turn.