HOUSING ASSEM. 4N5101 - Caterpillar

Illustration 1 g03760696
Table 1
Specification for 453-5356 Bulldozer Lift Cylinder Gp
Item Qty Part Specification Description
1 1 453-4760 Piston Torque to 2500 250 N m (1844 184 lb ft).
A 1 453-5359 Lift Cylinder As Bore is 101.60 0.08 mm (4.000 0.003 inch).
2 2 4J-6374 Bushing Bore before assembly is 50.622 0.013 mm (1.9930 0.0005 inch).
B 1 453-5352 Rod As Diameter is 63.450 0.038 mm (2.4980 0.0015 inch).
3 1 172-9981 Head Before assembly, apply clean grease to the threads.
Torque to 600 130 N m (443 96 lb ft).
Bore (C) over four lands is 63.83 0.03 mm (2.513 0.001 inch).
4 1 453-5363 Position Sensor Gp Operating voltage is 7 to 11 V.
Output type is pulse width modulation.
Duty cycle is 10 to 90 %
Output frequency is 250 15 Hz.
5 2 350-3842 Setscrew Torque to 23 3 N m (204 27 lb in).
6 1 8T-0785 Wear Ring Inside diameter before assembly is 63.5 mm (2.50 inch).
Thickness is 1.50 0.03 mm (0.059 0.001 inch).
7 1 289-2937 Buffer Seal As Lubricate the sealing lightly with the lubricant that is being sealed.
8 1 289-2948 U-Cup Seal Lubricate the sealing lightly with the lubricant that is being sealed.
9 1 225-3281 Wiper Seal Lubricate the sealing lightly with the lubricant that is being sealed.
10 4 8T-9102 Socket Setscrew Before assembly, apply blue Loctite 243 to the threads.
Torque to 3.3 N m (29.2 lb in).
11 - - Before assembly, apply green Loctite 536 to the wiper seal groove.