HOUSING 4T2619 - Caterpillar

Use rivets (133) and washers (132) in order to fasten flap (130) onto brackets (131) .Use bolts (12) and washers (13) in order to mount brackets (131) onto the elevator.
Illustration 92 g01683476
(134) 332-4800 Flap
Illustration 93 g01688185
(132) 8R-9645 Washer (133) 174-5807 Pop Rivet (134) 332-4800 Flap
Use rivets (133) and washers (132) in order to fasten flaps (134) onto the elevator.
Illustration 94 g01688186
(58) 5P-1076 Hard Washer (119) 8T-4139 Bolt (135) 332-4801 Flap (136) 332-5851 Plate (138) 332-4802 Flap (139) 332-5852 Plate
Illustration 95 g01688187
(58) 5P-1076 Hard Washer (119) 8T-4139 Bolt (135) 332-4801 Flap (136) 332-5851 Plate (137) 039-8557 Washer (138) 332-4802 Flap (139) 332-5852 Plate
Use bolts (119), washers (58), plates (136), and washers (137) in order to install flaps (135) onto the elevator.
Use bolts (119), washers (58), plates (139), and washers (137) in order to install flaps (138) onto the elevator.Installing the Film Group
Illustration 96 g01670975
(140) 255-5531 Film
Apply 255-5531 Film (140) onto the base of the elevator.
Illustration 97 g01670976
(141) 259-8068 Film (142) 300-2715 Film
Apply 259-8068 Film (141) onto the elevator on the right hand side of the toggle switch.Apply 300-2715 Film (142) onto the elevator on the left hand side of the toggle switch.
Illustration 98 g01670977
(92) 157-1364 Toggle Switch (142) 300-2715 Film (143) 273-6464 Film
Apply 300-2715 Film (142) onto the main control panel between the engine on/off switch and up/down toggle switch (19) for the elevator.Apply 273-6464 Film (143) over up/down toggle switch (92) for the elevator.
Illustration 99 g01670978
(3) 150-9559 Circuit Breaker As (144) 273-6463 Film
Apply 273-6463 Film (144) over circuit breaker (3) for the elevator. Circuit breaker (3) is located inside the battery box on the right hand side of the machine. Refer to Illustration 4 and Illustration 5.