4V6179 HOUSING Caterpillar parts
815B, 826C, 950B, 966D, 980C
Rating:
Alternative (cross code) number:
CA4V6179
4V-6179
4V6179
CA4V6179
4V-6179
4V6179
Weight: 1 pounds 0 kg.
LANDFILL COMPACTOR, WHEEL LOADER,
Compatible equipment models: 4V6179:
Number on catalog scheme:
17
For full view, you need register
Information:
Procedure
Replace the module.
Turn the key start switch to the OFF position.
Disconnect the machine harness from the module.
Ensure that the module that is replacing the old module has the correct part number.
Install the new module.
Connect the machine harness to the module. On so equipped machines, make sure that the harness code plug is installed.
Turn the disconnect switch and the key start switches to the ON position. Make sure that the module successfully completes the self test.Expected Result: The module has been successfully replaced and the module has completed the self test.Results:
YES - The module has been successfully replaced and has completed the self test. Proceed to Step 2.
NO - The module has been successfully replaced but has not performed the self test properly. Ensure that the module is correct. Ensure that the installation is correct and ensure that no related diagnostic codes are present. STOP.
Setup
Set up the optional display modules, see Systems Operation, RENR6489, "Settings Menu".
Set the desired units (English or Metric), see System Operation, RENR6489, "Settings Menu".
Replace the module.
Turn the key start switch to the OFF position.
Disconnect the machine harness from the module.
Ensure that the module that is replacing the old module has the correct part number.
Install the new module.
Connect the machine harness to the module. On so equipped machines, make sure that the harness code plug is installed.
Turn the disconnect switch and the key start switches to the ON position. Make sure that the module successfully completes the self test.Expected Result: The module has been successfully replaced and the module has completed the self test.Results:
YES - The module has been successfully replaced and has completed the self test. Proceed to Step 2.
NO - The module has been successfully replaced but has not performed the self test properly. Ensure that the module is correct. Ensure that the installation is correct and ensure that no related diagnostic codes are present. STOP.
Setup
Set up the optional display modules, see Systems Operation, RENR6489, "Settings Menu".
Set the desired units (English or Metric), see System Operation, RENR6489, "Settings Menu".
Caterpillar parts catalog:
Parts housing Caterpillar catalog:
980C, 980F, 980F II, 988, 988B
980C, 980F, D35C, D35HP, D44B, D550B
814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, R1600, R1600G, R1600H, R1700 II, R1700G
824C, 980C, 980F, 980F II, R1700 II
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 950B, 950B/950E, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, R1600, R1600G, R1600H
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 950B, 950B/950E, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, R1600, R1600G, R1600H
814B, 815B, 966D
518C, 528, 528B, 530B, 814, 815, 816, 950B, 950B/950E
815B, 816B, 966D
814B, 815B, 816B, 966D, 966F, 966G
814B, 815B, 816B, 966D, 966F, 966G, D25D, D350E, D400E, D40D
2V5035
HOUSING
950
950
3G3694
HOUSING
950
950
2V9998
HOUSING ASSEM.
814B, 815B, 816B, 826C, 966D, 980C
814B, 815B, 816B, 826C, 966D, 980C
2V0006
HOUSING ASSEM.
814B, 815B, 816B, 826C, 966D, 980C
814B, 815B, 816B, 826C, 966D, 980C
4V4715
HOUSING
966C
966C
4V4716
HOUSING
966C
966C