AVSPARE.COM
parts catalog

HOUSING-GEAR 5088203 - Caterpillar



5088203 HOUSING-GEAR Caterpillar parts HOUSING
Rating:
41
Alternative (cross code) number:
CA5088203
508-8203
5088203
Caterpillar 5088203 HOUSING-GEAR

Buy HOUSING-GEAR 5088203 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Rated Load with a Material Handling Arm
Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.The maximum placement height (ground line to the chain hook) is given for the highest position of the material handling arm. The maximum reach (front of the machine to the chain hook) is the maximum horizontal reach of the material handling arm.The rated operating capacity is the least amount of weight of the following conditions:
35% of the full static tipping load on a surface that is soft or a surface that is uneven
50% of the full static tipping load on a surface that is hard and level
The hydraulic lifting capacity
The material handling arm has a structural capacity of 907 kg (2000 lb).The following tables provide the Rated Operating Capacity (ROC) for the standard machine configuration that is equipped with the following items:
Full fuel tank
Lubricants
75 kg (165 lb) operator
Caterpillar Material Handling Arm
Illustration 3 g00668844
Lifting point 1 (1) Lifting point 2 (2)
Illustration 4 g01451261
Dimension (A) represents the clearance at the full down position from Lifting Point 2. Dimension (a) represents the clearance at the full down position from Lifting Point 1. Dimension (B) represents the clearance at maximum height from Lifting Point 2. Dimension (b) represents the clearance at maximum height from Lifting Point 1. Dimension (C) represents the minimum reach from Lifting Point 2. Dimension (c) represents the minimum reach from Lifting Point 1. Dimension (D) represents the maximum reach from Lifting Point 2. Dimension (d) represents the maximum reach from Lifting Point 1.
Table 13
Material Handling Arm    
Models     P/N     216-8756    
Weight 131 kg     289 lb    
Point 1     Point 2    
279C     R.O.C. 35%     651 kg     1435 lb     542 kg     1195 lb    
Clearance at Full Down -974 mm     -38 in     -1459 mm     -57 in    
Clearance at Maximum Height 4359 mm     172 in     4804 mm     189 in    
Minimum Reach 437 mm     17 in     285 mm     11 in    
Maximum Reach 1756 mm     69 in     2201 mm     87 in    
289C     R.O.C. 35%     757 kg     1669 lb     625 kg     1378 lb    
Clearance at Full Down -947 mm     -37 in     -1441 mm     -57 in    
Clearance at Maximum Height 4470 mm     176 in     4915 mm     194 in    
Minimum Reach 516 mm     20 in     398 mm     16 in    
Maximum Reach 1650 mm     65 in     2096 mm     83 in    
299C     R.O.C. 35%     862 kg     1901 lb     710


Parts housing Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.